Customer Reviews for VEVOR Transmission Fluid Pump, 3 L Capacity, Manual Fluid Transfer Pump with 120 cm Long Horse & HDPE Tank, Transmission Oil Pump with PTFE Tape, Manual Automotive Oil Filling System

Returned. I bought this to use with my Honda, but the dipstick tube is too narrow. It would take a month of Sundays to suck all the oil out that way.

Works well for the price. Not the easiest to push the fluid out of the container. Sometime it's hard to get the lid unscrewed. Overall good. Did come with some accessory hoses and connectors.

Très bien sauf l embout pour clipser les tuyaux au bout qui n' est pas terribles

Despite repeated request the item was not delivered .

I tried to extract the oil from a 160cc Honda engine. The tubes provided all have the same outside diameter. The hose I used did get into the crankcase through the dipstick opening, but was difficult to get it in. Then when I went to extract the oil I barely got any oil out after 2 attempts. I finally had to tip the mower over to drain the oil, which defeats the purpose of getting this. I've asked for a refund and will return it. I did purchase the 9L unit at a great price this morning to replace it. As you can see from the pictures, the oil barely made it into the container. There was about 18 ounces of oil in the engine, after 2 complete pulls (which were difficult) I got, at best 8 ounces out. Not too impressed.

Wat een oplichters zeg...je kan niet eens retour zenden, omdat ze te ver weg zitten...en dar zeggen ze niet op de site... Op de klantenservice word totaal niet gereageerd Oplichting mensen!!!!!!

Way to hard to extract and push fluid out .very disappointing

None of the several attachments are of sufficient length and have a small enough diameter to fit into an oil dipstick hole. Also, there is no locking mechanism to maintain the vacuum. This device might be adequate for extraction brake fluid, or something like that, but it’s not suitable for oil changes on large or even small engines.