Customer Reviews for VEVOR Transmission Fluid Pump, 3 L Capacity, Manual Fluid Transfer Pump with 120 cm Long Horse & HDPE Tank, Transmission Oil Pump with PTFE Tape, Manual Automotive Oil Filling System

Too stiff to pump and hard to pump extract too. Would not recommend

Is there a video n how to connect the hoses on the 9L? Needs videos.

Barrel was ovalized and syringe sticks needs huge amount of force to use. Vevor support unhelpful and refused to remedy.

The kit states that it has filler adapter for nissan transmissions. None of the adapters fit on my 7-speed nissan armada transmission. My vehicle is now sitting on my driveway with no way for me to refill the transmission!!

Nach 2 mal benutzen undicht.

Tried using it for the sole purpose it was purchased and tbh I am left bitterly dissapointed! Trying to replace differential oil and it fails to successfully fill the pump at all. Stop valve open and pulling with such force that Im terrified it'll release pressure and I'll knock myself unconscious. A $5 cheap nasty temu item does a better job just needs 20x the use due to smaller volumes

This is basically a garden pump sprayer, but with a bigger hose and higher price tag. Although it also has a funnel that screws on the top and makes filling it easier. However this setup seems like overkill for the job it was designed for. Previously I used what amounts to a large soap pump that screws on the fluid bottle. I would attach a hose to the pump and used that to fill the differential or whatever I was working on. It takes up almost no space and requires minimal cleaning. This pump on the hand has lots of parts and the opening of the bottle is not big enough to fit my hand making it hard to clean. Overall this pump does what it says and is durable, I just find it messier and more time consuming that using my basic pump.

I have really only one disappointment. That is the hose is not flexible at all. The pump works well to pressurize the tank. There is a spring loaded relief valve on the opposite side of the tank. The black neck is a built in funnel and aids filling the tank. I plan to use this to add hydraulic fluid to my tractor. The fill is difficult to reach and this will work perfectly. The pump fits securely to the tank. The ball valve seems to close and stop fluid. The tank is easy to use with just adding your fluid and insert the plastic tip into what you want to fill up. There are easily visible graduations on the side to be able to easily see what you have added. The pressure relief valve is easy to lift up when you are finished to keep fluid from being pushed out of the tank when you are finished. I will probably swap the hose out for something more flexible down the road. Other than that I feel this is a very useful tool for the money. I will utilize this often. The plastic does feel like you want to use care and not drop it.

Graduation complètement fausse ! Pour un produit destiné à du " remplissage" ou autre, ne pas pouvoir ce servir de la graduation pour la contenance est bien dommage... Ou grave ...

I used the medium tube first and only got internal engine smells. Switched to the smallest tube and finally got it down into the oil and only got about three or four liters after an hour or more of frequent pumping. The oil was warm but it was coming out so slowly. After a while I wasn’t sure if it were even in the oil any more. I would return it and exchange it for a pneumatic extractor instead if I could. Even then I’m not sure it would work well. BTW I have a 5.3 V8. I don’t think there is actually a straight/direct path to the oil in the 5.3 V8 through the dip stick tube.