VEVOR Underbody Truck Tool Boxes – The Smart Way to Store, Secure, and Save Space

Need extra, hidden storage under your pickup? The VEVOR under body truck tool boxes fit under your truck bed, providing a secure and weather-proof space without reducing the size of your truck bed. Our truck underbody tool box units are more efficient than other trucks because they maximize the utility of your vehicle and hide all that clutter.

The VEVOR underbody truck tool box is made of heavy-gauge aluminum diamond plate, has a latchable lid, and a T-handle. The size (e.g., 24x14x16 in one model) is such that the box fits even under many trucks without affecting the ground clearance. It can hold small hand tools, jacks, straps, or emergencies with a rated load capacity (e.g., 66 lbs). This subcarriage storage transforms unutilized space into rough, off-view tool storage.

Watch the video to understand how the VEVOR underbody truck boxes work. 

Product Detail Features Of VEVOR Underbody Truck Tool Boxes

Slim Profile That Preserves Ground Clearance

The VEVOR underbody tool box for truck have a low height; thus, it fits flat under the frame rails and enables you to retain your entire ground clearance, yet have your tools under your bed. These boxes are smaller and fit only a few inches under the floor of the truck, unlike big overhead beds that have a bulky size. 

Since they are housed beneath the chassis, they do not disrupt ramps, trailers, or off-road terrain. This profile will provide you with the concealed storage capacity of the truck's underbody toolbox without compromising performance.

Full-Length T-Handle Latch With Locking System

The VEVOR underbody truck tool box has a complete T-handle lock system with keyed locks at each end. Thus, you can work on either side of the truck. 

The strong latch system holds the lid firmly tight and is not subject to vibration, theft, or road grit. There is no worry about weak catches - this unit offers truck-level security underneath the body, keeping your valuable equipment secure and protected.

Rubber Gasket Seal for Weatherproofing

The VEVOR underbody truck box has a continuous rubber gasket around the perimeter of the lid to prevent intrusion by water. This seal prevents rain, mud, and debris even during downpours. 

On the inside, your tools are kept dry and free of corrosion. Most users equate it to an alternative of underbody truck boxes, which leak with time elapse - the gasket of the box endures severe under driving vibration and fluctuating temperatures.

Reinforced Internal Brackets & Mount Points

The VEVOR underbody truck tool box has internal reinforcements, which are ribbed aluminum floors and welded mounting bosses. They do not flex even when loaded. Divider trays, racks, or pallets can be mounted. Its design allows you to tie or bolt your stuff in the box securely. 

It has a rigidity that is not common with truck models' underbody toolboxes. It may not be able to hold any weight when it vibrates or is used a lot.

Quick-Access Dual Side Doors

The VEVOR underbody truck tool boxes are designed with two side-access doors, unlike other underbody boxes that have one front door. This is a time-saving convenience when loading or unloading at various angles. 

It also comes in quite handy in situations where one parks parallel or works by the road. In a truck underbody tool box, this is a clever design of a dual door, an easy-to-use addition.

VEVOR Underbody Truck Tool Boxes :Setup & Installation Steps 

Step 1: Measure and Mark Mounting points

Jack stands, raises, and supports the bed. Calibrate between the frame rails and indicate where the VEVOR underbody truck tool box mounting feet will come in contact. Make sure that the box is parallel and placed directly under the car.

Step 2: Drill Mount Holes and Remove Brackets

Secure the box with your hands and indicate the location of holes with the flanges of the mount. Make holes in your frame where necessary. The same box should be attached using the mounting brackets provided, and then the box should be placed.

Step 3: Bolt the Box to Brackets

Install the truck underbody toolbox on the brackets. Secure with bolts, lock washers, and nuts. Squeeze firmly in steps to have the metal touching together, but not twisting or straining due to the squeeze.

Step 4: Seal Edges & Test Lid Fit

To prevent corrosion, use thread or silicone sealant in bracket interfaces. Close the lid and run the T-handle to ensure that it locks easily. Ensure that the lid is not fastened against the frame or hindrances.

Step 5: Gear Loading and Clearance

Insert the equipment indoors, even the balance. Then reduce the vehicle and travel fairly through obstacles to ensure clearance. Ensure that the tool boxes of the VEVOR underbody truck do not hit the parts of the road or trailers.

VEVOR Underbody Truck Tool Box Uses and Applications

• Safe storage of trades, construction, or field work tools.
• Keep recovery equipment, straps, jacks, or safety materials in the store.
• Undercarriage cargo box on trailers, campers, or vans.
• Under-chassis plumbing kit or electrical kit.
• Out of sight tool chest that fits conveniently into the overlanding vehicles.
• Lock up small service gear on fleet trucks.

Upgrade Your Truck’s Utility with VEVOR

Utilize the space not utilized under your car using the VEVOR underbody truck tool boxes. Tough, safe, and intelligently made, they allow you to put necessary things in your bag and not fill your bed. This model is an intelligent upgrade for any truck owner, whether you need one box or more underbody solutions. View the demo, install it only once, and then you will have your bed back.