Customer Reviews for VEVOR Fluid Extractor, 9.5 L Capacity, Manual Vacuum Fluid Extractor with 150 cm Long Horse and Three 120 cm Extension Tubes, Oil Change Pump with HDPE Tank for Cars, Lawn Mowers, Boats

This is basically a garden pump sprayer, but with a bigger hose and higher price tag. Although it also has a funnel that screws on the top and makes filling it easier. However this setup seems like overkill for the job it was designed for. Previously I used what amounts to a large soap pump that screws on the fluid bottle. I would attach a hose to the pump and used that to fill the differential or whatever I was working on. It takes up almost no space and requires minimal cleaning. This pump on the hand has lots of parts and the opening of the bottle is not big enough to fit my hand making it hard to clean. Overall this pump does what it says and is durable, I just find it messier and more time consuming that using my basic pump.

I have really only one disappointment. That is the hose is not flexible at all. The pump works well to pressurize the tank. There is a spring loaded relief valve on the opposite side of the tank. The black neck is a built in funnel and aids filling the tank. I plan to use this to add hydraulic fluid to my tractor. The fill is difficult to reach and this will work perfectly. The pump fits securely to the tank. The ball valve seems to close and stop fluid. The tank is easy to use with just adding your fluid and insert the plastic tip into what you want to fill up. There are easily visible graduations on the side to be able to easily see what you have added. The pressure relief valve is easy to lift up when you are finished to keep fluid from being pushed out of the tank when you are finished. I will probably swap the hose out for something more flexible down the road. Other than that I feel this is a very useful tool for the money. I will utilize this often. The plastic does feel like you want to use care and not drop it.

Graduation complètement fausse ! Pour un produit destiné à du " remplissage" ou autre, ne pas pouvoir ce servir de la graduation pour la contenance est bien dommage... Ou grave ...

I tried to extract the oil from a 160cc Honda engine. The tubes provided all have the same outside diameter. The hose I used did get into the crankcase through the dipstick opening, but was difficult to get it in. Then when I went to extract the oil I barely got any oil out after 2 attempts. I finally had to tip the mower over to drain the oil, which defeats the purpose of getting this. I've asked for a refund and will return it. I did purchase the 9L unit at a great price this morning to replace it. As you can see from the pictures, the oil barely made it into the container. There was about 18 ounces of oil in the engine, after 2 complete pulls (which were difficult) I got, at best 8 ounces out. Not too impressed.

Wat een oplichters zeg...je kan niet eens retour zenden, omdat ze te ver weg zitten...en dar zeggen ze niet op de site... Op de klantenservice word totaal niet gereageerd Oplichting mensen!!!!!!

Despite repeated request the item was not delivered .

Way to hard to extract and push fluid out .very disappointing

None of the several attachments are of sufficient length and have a small enough diameter to fit into an oil dipstick hole. Also, there is no locking mechanism to maintain the vacuum. This device might be adequate for extraction brake fluid, or something like that, but it’s not suitable for oil changes on large or even small engines.