Select the country/region, language, and currency you prefer for shopping.

Jigsaws

Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
In Stock
Pickup
Black Friday

We couldn't find a match

Please try with other options or clear your filters.

You May Also Like
Recently Viewed

Results for  Jigsaws

A jigsaw is a handheld power saw that cuts with a short, narrow blade that moves rapidly up and down. Its motor converts rotary motion into this reciprocating stroke, and the blade cuts on the upstroke while a flat base plate rides on the workpiece to keep the line steady. Because the blade is thin and held at one end only, the saw can follow a marked line in any direction, turning tight curves, cutting full circles and starting interior openings from a drilled pilot hole. Speed control and the right blade let the user match each cut to the job.


VEVOR jigsaws come in three forms. Corded jigsaws run on a 6.5 amp, 120V motor for nonstop bench work. Battery-powered models use a 20V pack and a brushed motor rated at 3000 SPM, while brushless models on the same 20V platform raise blade speed to 3500 SPM. Every saw bevels from 0 to 45°, offers 4 orbital settings and 6 speed settings, and comes with 6 blades. Typical uses are curved cuts in plywood, sink and outlet cutouts in countertops, shaped furniture parts and metal cuts up to 10 mm thick.


Four things decide what you need:


  • Power source: a cord gives unlimited runtime at the bench, while a battery lets you cut on ladders, decks and job sites with no outlet nearby.
  • Motor type: brushless motors waste less energy and last longer, so each charge goes further if you cut most days.
  • Cutting depth: compare the saw's maximum wood and metal depth with the thickest stock you plan to cut.
  • Blade changes: if you switch between wood, metal and tile, a tool-free blade clamp and T-shank fit save time on every swap.

Browse the full jig saw range to compare every corded and cordless model side by side, or explore VEVOR saws for other cutting jobs around the workshop.


Jigsaw Types at a Glance


The table below sets the three jigsaw types side by side so you can match one to how and where you cut.


Type Runtime Motor Upkeep Usage Setting Trade-offs
Corded jigsaw Continuous while plugged in Carbon brushes wear over time Workshop bench near an outlet Steady power, but the cord limits reach
Cordless brushed jigsaw Limited by battery charge Carbon brushes wear over time Home repairs, garage and yard Cuts anywhere; drains batteries faster than brushless
Cordless brushless jigsaw Longest per charge No brushes to replace Job sites and frequent daily cutting Most efficient cordless option; highest blade speed

VEVOR Jig Saw: Precision Cutting Power for Every Material & Project


Do you have trouble making precise cuts, poor tool control, or insufficient cutting power in your woodworking and DIY projects? VEVOR jig saw is the most versatile cutting tool in any workshop, providing accurate curved cuts, straight lines, bevel angles and detailed shapes of wood, metal, ceramic and plastic materials with ease of control. Need the top cordless jig saw to be as portable as possible to use at the job sites, or exclusive jig saw blades to cut furniture to the utmost, or a powerful corded jig saw to use in the workshop permanently? VEVOR has the full spectrum of professional-level cutting tools. VEVOR offers precision, power, and reliability to all cutting tasks, whether in compact hobbyist models or heavy-duty professional cordless jig saws.


VEVOR Jig Saw: Design & Performance Features


VEVOR jig saws have carefully designed precision features that provide high-quality cutting performance, easy handling and extensive dependable longevity in all woodworking, metalworking, and DIY cutting tasks.


Variable Speed Control


All VEVOR jig saws have a variable speed trigger mechanism to provide the user with the ability to control cutting speed with low RPMs on delicate materials to the highest speed on thick hardwoods and metals. Variable speed control enables operators to adjust cutting speed to exactly match material type and thickness, eliminating blade overheating, material burning, and early jig saw blade wear due to incorrect speeds when used with certain material combinations.


High-end Motor Performance


VEVOR best cordless jigsaws offer high motor power ratings that deliver high-cutting performance across the board during heavy continuous use without significant power dropoff, overheating, or other performance loss. Premium VEVOR models use brushless motor technology to maximize battery efficiency, increase the life of the motor, and provide more predictable torque output over all cuts despite changes in material resistance during complex cutting tasks.


Adjustable Bevel Base Plate


VEVOR cordless jig saw models have precision adjustable bevel base plates which tilt to preset 15, 30 and 45 degree angles, allowing fine bevel cuts, angled profiles and chamfered edges to be cut without the need for extra angle measuring tools or complicated repositioning of the workpiece during cutting tasks.


Anti-Vibration Handle Design


All VEVOR best cordless jigsaws have anti-vibration handle designs that absorb and damp vibration during cutting before it is transferred to the hands of the operator, greatly reducing fatigue in long cutting jobs and enhancing cutting accuracy as the tool can be held steady during each cut.


How to Choose the Right Jig Saw Blades for Your Material


To achieve clean cuts, long and effective blade life, and maximum cutting performance with all VEVOR jig saw uses, it is important to select the right jig saw blades for your material.


Wood Cutting Blades


VEVOR cordless jig saw blades for wood come in fine tooth, medium tooth, and coarse tooth types. Fine-tooth blades (10-12 TPI) cut hardwoods, plywood, and veneered panels smoothly and without splinters. Use these when a high-quality surface finish is needed. Medium-tooth blades (6-8 TPI) balance speed and quality for cutting general softwood and hardwood. Coarse-tooth blades (4-6 TPI) are fastest in thick softwoods and green lumber, where finish is less important than speed.


Metal Cutting Blades


Jig saw blades for cutting metal have fine, hardened teeth. They are made to cut steel sheets, aluminum profiles, and copper pipes.


Ceramic and Tile Blades


Tungsten carbide grit jig saw blades are used for cutting ceramic tiles, fiber cement board, and other tough materials. These materials can quickly damage regular toothed blades. High-quality blades use an abrasive motion instead of teeth. This method removes material smoothly and helps avoid chipping, cracking, or wearing out the blade too soon.


Blade Shank Compatibility


Jig saw blades for wood should always be purchased with the shank type. VEVOR cordless jigsaws take universal T-shank blades, the most common standard available, in a wide variety of blades available by virtually every blade manufacturer.


Blade Length Selection


Choose blade length according to your material thickness. Always have a blade at least 1 inch longer than your material thickness to get a full stroke and avoid the blade tip contacting the workpiece in the upstroke of each cutting cycle.


Setting the Saw for Each Material


Blade choice is only half the setup, so use these speed and orbital settings as a starting point for each material.


Material Speed Setting (1 to 6) Orbital Setting What to Watch For
Thick softwood High, 5 to 6 3 (maximum) Full orbit clears chips fast; expect a rougher edge to sand
Hardwood High, 5 to 6 1 to 2 Back off the orbit if the blade wanders or the wood scorches
Plywood and veneer Medium to high, 4 to 5 0 to 1 Blade cuts upward, so mark and cut with the good face down
Steel and aluminum sheet Low to medium, 2 to 3 0 (off) Clamp close to the line and add cutting oil to limit heat
Ceramic tile Low, 1 to 2 0 (off) Use grit blades only and let the saw work without pressing
Acrylic and plastic Low to medium, 2 to 3 0 (off) Too much speed melts the kerf and welds the cut together

Safety Tips for Using a Cordless Jig Saw Effectively


The safe use of your VEVOR cordless jig saw requires you to follow a few basic safety measures. These will keep both you and the workpiece safe during cutting sessions.


Secure Your Workpiece


Always clamp workpieces to a stable work surface before starting. An unsecured workpiece can vibrate, move, or kick. This may cause imprecise cuts, blade binding, or dangerous kickback, even during shortcuts.


Wear Proper PPE


Always use safety glasses, headphones, and a dust mask with your VEVOR cordless jig saw. Wood chips, metal particles, and dust can cause eye, hearing, or respiratory injuries. Wear personal protection for every cutting session.


Check Blade Before Use


Inspect jig saw blades before use. Replace dull, bent, or broken blades immediately. Bad blades need more force, leave poor finishes, increase blade separation risk, and may cause kickback.


Best-Seller Comparison


These are the VEVOR jigsaws on this page, compared on the specs that set each one apart.


Product Power Source Motor Max Speed Stroke Length Wood Cut Depth Battery Best For
6.5 Amp Corded Jig Saw, 3000 SPM 120V AC, 6.5 A Brushed 3000 SPM 7/8 in 4.33 in Not needed, corded Only corded model here; long bench sessions without recharging
20V Brushed Jig Saw Kit, 3000 SPM 20V DC Brushed 3000 SPM 3/4 in 5.12 in Included, 2000mAh Only brushed cordless model; occasional DIY cuts away from outlets
20V Brushless Jig Saw with Carry Case 20V DC Brushless 3500 SPM 7/8 in 5.12 in Included, 2000mAh Battery, charger and case at 4.85 lb; grab-and-go job site kit
20V Brushless Jig Saw, Wood and Metal 20V DC Brushless 3500 SPM 7/8 in 5.12 in / Joint fastest at 3500 SPM; heavy wood and metal cutting

VEVOR Jig Saws. Cut Smarter Today!


The full line of VEVOR jig saws provides superior cutting accuracy, multi-purpose capability, and professional quality longevity to all woodworking, metalworking, and do-it-yourself projects. With cordless jig saws with brushless motors to full jig saw blades in wood and all materials, VEVOR has an ideal solution to every cutting project, every material type and every level of skill. With competitive pricing, fast delivery, and a 30-day return guarantee, upgrading your cutting capability has never been easier.


Check out VEVOR Jig saws Now and cut with more precision, power, and confidence on all projects today.


FAQs


What are the key features to consider when choosing a jigsaw?


Start with power source, motor type, blade speed and maximum cutting depth, then check orbital action, bevel range and tool-free blade changes. Every model in the VEVOR jigsaw lineup offers 6 speeds, 4 orbital settings and 0 to 45° bevels, so the real choice is corded or cordless, brushed or brushless.


Which jigsaw should I choose based on its intended use?


Choose a corded jigsaw for long workshop sessions and a cordless one for work away from outlets. A brushed 20V saw suits occasional home repairs, while frequent or trade use favors a brushless model that wastes less energy and gets more cutting from each charge.


Is a jigsaw good for beginners?


Yes, a jigsaw is one of the easiest power saws to learn because the narrow blade and flat base give good control. Start on scrap at a medium speed with the orbit off, clamp the workpiece firmly and let the blade cut without forcing it.


What is the difference between a corded and cordless jigsaw?


A corded jigsaw draws mains power for unlimited runtime, while a cordless jigsaw runs on a rechargeable battery for full portability. The VEVOR corded saw uses a 6.5 amp, 120V motor, and the cordless models run on 20V packs at up to 3500 SPM.


What materials can a jigsaw cut?


A jigsaw cuts softwood, hardwood, plywood, laminate, plastic, aluminum, steel sheet and ceramic tile when fitted with the right blade. VEVOR jigsaws cut wood up to 5.12 in deep on cordless models and metal up to 10 mm, using T-shank blades matched to each material.


Are cordless jigsaws any good?


Yes, a modern cordless jigsaw handles most home and job site cutting as well as a corded saw. A 20V brushless model reaches 3500 SPM with a 7/8 in stroke; the trade-off is runtime, so keep a spare charged battery for long or thick cuts.


What is the best corded jigsaw?


The best corded jigsaw pairs a strong motor with variable speed, orbital action and tool-free blade changes for steady, all-day cutting. The VEVOR 6.5 amp model delivers 3000 SPM, 6 speeds, 4 orbital settings and 4.33 in wood capacity without ever stopping to recharge.


Do cordless jigsaw batteries last long?


A charged pack lasts long enough for most home projects, but runtime depends on battery capacity, material thickness and speed setting. VEVOR cordless jigsaws use a 2000mAh battery, so thick hardwood drains it faster, and brushless motors stretch each charge further than brushed ones.


Tips & Inspiration