Welding Kits
Results for Welding Kits
A welding kit is a set of tools that joins two pieces into one by melting them together where they meet. This page covers two kinds. A fusion splicer joins optical fibers: it lines up two cut glass fiber ends and melts them with an electric arc, so light passes through with almost no loss. A spot welder joins sheet metal: copper tips clamp two overlapping steel sheets and pass a high current that fuses them at one point. Telecom installers and metal workshops use them.
Core-alignment fusion splicers use 6 motors and 320x magnification to line up single-mode fiber cores, splicing in about 6 seconds. Cladding-alignment splicers use 4 motors for multimode and shorter runs. Some models add Bluetooth app control, while others build in a visual fault locator and power meter to test the link on the spot. Most run on 7800 mAh batteries rated for about 260 splice and heat cycles per charge, come with a cleaver and stripper and pack into a carry case. Browse the full fusion splicer lineup for touch screen and LCD versions. For sheet metal, the portable spot welder delivers up to 6500 A from a 1.5 kVA input and joins carbon steel up to 1/8 in thick. Typical uses are FTTH installs, data centers, auto body and sheet metal work.
Five things decide which one fits:
- Main job: fusing glass fiber or spot welding sheet steel.
- Precision: fiber alignment method, or how thick a sheet the welder joins.
- Speed: splice and heat seconds, or the welder's duty cycle.
- Power source: battery size for field work, or input power for a welder.
- Weight: how far you can carry it to a pole, cabinet or car.
Browse all welding kits to match the tool to your fiber or metal work.
Welding Kit Types at a Glance
The table below shows how each type of welding kit on this page works, how to choose between them and the key benefit of each.
| Type | How It Works | How to Choose | Key Benefit |
|---|---|---|---|
| Core-alignment splicer, touch screen | 6 motors line up fiber cores before the arc fuses them | Pick it for single-mode fiber with touch screen control | Core alignment gives the lowest loss on single-mode |
| Core-alignment splicer, LCD | Same 6-motor core alignment with button controls | Pick it for single-mode fiber if you prefer buttons | Same core alignment with simple button controls |
| Cladding-alignment splicer | 4 motors align the outer cladding of each fiber | Pick it for multimode fiber inside buildings | Fast 6s splicing with up to 1100x zoom |
| Splicer with Bluetooth app | Splice data and settings sync to a phone | Pick it if you send splice reports to clients | Syncs splice data and settings to your phone |
| Splicer with VFL and OPM | A built-in red laser and power meter test the link | Pick it if you want to test the link on site | Built-in laser and power meter replace separate test gear |
| Portable spot welder | Copper tips clamp sheets and pass up to 6500 A | Pick it for carbon steel sheet up to one-eighth inch | Up to 6500 A from a 110 V outlet |
VEVOR Welding Kits: Complete Equipment for Metal, Plastic, and Fiber Welding Tasks
Are you looking for a trusted welding kit that works for your job or project? There are many different types, power outputs, and uses for welding tools. VEVOR offers well-made choices for both new and experienced welders across a range of fields. Choose the right kit for your materials, application, and workspace to work with confidence.
Welding Type and Application: Matching the Right Kit to Your Work
Before you can choose the right welding kit, you need to know what material you'll be working with and what type of weld you'll need. For each material type and joining method, a different welding tool is used. If you choose the right kit for the job, you will always get stronger welds, more accurate results, and safer operation.
PVC Welding Gun for Plastic Repair and Fabrication
A PVC welding gun is essential for joining, repairing, and fabricating plastic components. Plastic welding differs from metal welding because it uses controlled heat to smooth thermoplastic surfaces and a filler rod to join them. The plumbing industry, the interior of cars, signs, and industrial plastic manufacturing all regularly use PVC welding guns.
A VEVOR PVC welding gun maintains a stable temperature once the desired heat setting is selected. The user can match the heat level to the type of plastic being welded because the temperature output can be changed. Most models reach working temperature quickly, so there is less time between jobs. The handle's ergonomic design helps keep your hands from getting tired during long periods spent working on large plastic surfaces or during production runs.
Proper surface preparation is essential before using a PVC welding gun. Before the welding starts, both areas must be clean, dry, and free of any dirt or oil. If you use the right filler rod material that fits the base plastic, the bond will be strong and last a long time. You can use VEVOR welding kits with PVC, polyethylene, polypropylene, and other popular thermoplastics. Selecting the correct tip form and size can also affect weld quality. For wide seam welding, flat tips work well, while round tips are better for small fixes.
Optical Fiber Fusion Splicer for Telecommunications and Network Work
To join two optical fiber cables with minimal data loss, an optical fiber fusion splicer is a precision welding tool. In fusion splicing, an electric spark melts and joins the ends of the fibers at the molecular level. The end result is a link that is almost seamless and maintains a strong signal even over long cable runs. Fusion splicers are crucial for installing internet networks, data centers, and phone lines.
Before splicing, VEVOR optical fiber fusion splicers use advanced tools to carefully align the fiber ends to a very precise level. Core alignment models are the most accurate and are best for single-mode fiber use. Cladding alignment models work better with multimode fiber installs and are faster. When used properly, both types produce reliable splices with low loss.
To use a fusion splicer, the fibers must be thoroughly prepared. Before putting the fiber in the splicer, it needs to be stripped, cleaned, and cut so that the ends are flat and straight. One of the main causes of high splice loss is improper fiber cleaving. Many VEVOR fusion splicers come with a travel case and a built-in cleaver, so the whole kit is ready to use in the field. The unit's screen displays splice-loss data immediately after each splice, so the operator can check quality right away.
Welding Machine Handheld for Versatile On-Site Use
A handheld welding machine gives workers the most freedom when they need to work in different places or with materials that can't be moved to a set desk. With their small size and light weight, handheld welding machines are easy to use with one hand in awkward or tight areas. Maintenance workers, car body technicians, and contractors need a portable way to weld like these units.
If you choose the right model, the VEVOR mobile welding machines can perform multiple welding methods, including MMA (stick) and TIG. Because it is easy to use and compatible with many electrodes, MMA welding is the best method for beginners and professionals alike. When you use TIG welding, you can join stainless steel, aluminum, and thin materials with greater precision and cleanliness.
When evaluating any mobile welding machine, the duty cycle is an important feature. Duty cycle is the amount of time a welder can work nonstop within a ten-minute window before they need to stop and cool down. At 150 amps and 60% duty cycle, the unit can weld for 6 minutes before needing a 4-minute rest. The comparatively long duty cycles of VEVOR handheld welding tools allow continuous work without frequent breaks.
Industrial Plastic Welding Machine and Track Torch for Production Work
With an industrial plastic welding machine, you can make and fix many plastic things at once, which is more than a regular small welding gun can do. These tools are commonly used in continuous production environments because they provide consistent heat output. Some uses include making tanks, installing liners, and joining large plastic panels together.
VEVOR industrial plastic welding machines feature digital or dial-based temperature control, allowing you to precisely set the temperature. In work settings, consistent heat output is very important because changes in temperature cause welds to be weak or not form properly. Many industrial models come with automatic welding attachments that maintain a steady motion along the weld seam. This makes it easier to do the same thing repeatedly without making mistakes.
With a track torch, you can weld straight lines on flat metal or plastic surfaces while using a welder machine. The torch moves at a steady pace along a set track or guide rail, ensuring the weld bead remains consistent from beginning to end. You can easily join geomembrane liners, roofing materials, and big plastic pieces together with a track torch. Contractors and fabricators working on large surface-welding projects can rely on VEVOR track torches, as they deliver consistent heat and travel speed.
Matching a Welding Kit to the Job
Use the table below to match each job's material and site conditions to the one product that suits it, and its main limitation.
| Job | Material to Join | Site Conditions | Recommended Product | Main Limitation |
|---|---|---|---|---|
| Long single-mode backbone splicing | Single-mode fiber | Long field shifts on battery power | Touch screen core-alignment splicer | 11.8 lbs with kit and case, 3.9 lbs heavier than the lightest splicer |
| FTTH drop installs with client reports | Single-mode drop cable | Customer sites that need splice reports | 6s splicer with Bluetooth app | 15s heating, 2s longer than the 13s models |
| Multimode LAN work in buildings | Multimode fiber | Indoor runs inside buildings | 4-motor cladding splicer | Cladding alignment can leave higher loss on long single-mode links |
| High-volume splicing on a production line | Single-mode and multimode fiber | Fixed bench with many splices per shift | 5s splicer with VFL and OPM | 15s heating, three times the 5s splice |
| Aerial and pole work where weight matters | Single-mode fiber and drop cable | Climbing with the kit | Lightweight Bluetooth splicer | 8s splicing and 18s heating, the slowest here |
| Spot welding car body panels | Carbon steel sheet up to one-eighth inch | Garage with a 110 V outlet | Portable spot welder | Carbon steel only, with no stainless steel and no aluminum |
Power Requirements and Portability: Choosing a Welding Kit That Fits Your Workspace
Understanding power requirements and portability helps you choose a welding kit compatible with your available power supply and workspace. How and where you can use a welding kit effectively depends on its power draw, input voltage, and unit weight.
Power Input and Electrical Compatibility for Welding Kits
Different welding kits require completely unique power levels. Some units work with standard 110V home electricity, while others need 220V or three-phase industrial electricity. If you choose a welding kit compatible with the power source you already have, you can avoid installation delays and the cost of upgrading it.
Some VEVOR welding kit models can work with both 110V and 220V inputs, depending on the unit type and output rating. Handheld PVC welding guns and other entry-level welding tools usually run on 110V, making them suitable for home garages and small workshops. For stable, high-current operation, industrial plastic welding tools and spot welders with higher output usually need 220V. Dual-voltage models give you more options because they can easily switch between input voltages.
A spot welder is a typical example of a high-current welding tool that needs steady power. Spot welders use two copper electrodes to focus heat and pressure on a small area. This joins overlapping metal pieces. The most popular uses are bodywork for cars and sheet-metal fabrication. To work with a range of workshop setups, VEVOR spot welders come in both 110V and 220V versions. Before connecting any high-draw welding tools, you should always check the rating of your circuit breaker.
Portability and Job Site Readiness for Welding Kits:
Welders who move from job site to job site or work in places without fixed workstations need tools that are easy to carry. Every job takes longer and requires more physical effort when the welding kit is hard to move around. It's easy to move around when a machine is small, has built-in handles, or comes with a carrying case.
The VEVOR handheld welding tools and the PVC welding guns are two of the easiest-to-move welding kits. Most units weigh less than ten kilograms and come with a shoulder strap or handle for easy transport. When you take an optical fiber fusion splicer to the field, it comes with a hard-shell travel case that protects the sensitive components. Track torches come in kits that are easy to carry and can fit in a normal tool bag or transport case.
When access to a power source is limited on a job site, battery- or inverter-powered welding kits can be a practical option. Inverter-based welding machines are better at converting raw power than transformer-based machines. This makes them lighter and smaller without affecting their output performance. VEVOR inverter welding machines offer stable arc performance in a portable design that works well on construction sites, for outdoor repairs, and for remote installations.
Best-Seller Comparison
Compare the five best-selling welding kits below by main job, precision, speed, power source and weight.
| Product | Main Job | Precision | Speed | Power Source | Weight |
|---|---|---|---|---|---|
| VEVOR Fiber Fusion Splicer, 6 Motors, Core Alignment, 5 in Touch Screen | Fusion splicing SM, MM, DS and NZDS fiber, with built-in VFL and OPM | Core alignment, 320x single view, loss as low as 0.01 dB | 6s splicing and 13s heating | 7800 mAh battery, up to 260 cycles per charge | 11.8 lbs with kit and case |
| VEVOR Portable Spot Welder, One-Eighth Inch, 1.5 kVA | Spot welding carbon steel sheet for auto body and fabrication | Joins carbon steel up to one-eighth inch thick only | 50% duty cycle, lever operated | 1.5 kVA input on 110 V, up to 6500 A output | 26.5 lbs, the heaviest here |
| VEVOR Fiber Fusion Splicer, 6 Motors, 8s Splicing, 18s Heating, 5200mAh | Fusion splicing SM, bend-insensitive, MM and drop cable, with Bluetooth app | 0.5 µm core alignment, 320x single view | 8s splicing and 18s heating, the slowest here | 5200 mAh battery, the smallest here | 7.9 lbs, the lightest here |
| VEVOR Fiber Fusion Splicer, 6 Motors, Core Alignment, 5 in LCD | Fusion splicing SM, MM, DS and NZDS fiber, with built-in VFL and OPM | Core alignment, 320x single view, loss as low as 0.01 dB | 6s splicing and 13s heating | 7800 mAh battery, up to 260 cycles per charge | 11.8 lbs with kit, LCD with buttons instead of touch |
| VEVOR Fiber Fusion Splicer, 4 Motors, Cladding Alignment | Fusion splicing SM, MM, DS and NZDS fiber on a 5 in touch screen | Cladding alignment, 330x view with up to 1100x zoom | 6s fast and 9s standard splicing modes, 13s heating | 7800 mAh battery, over 260 cycles per charge | 11.24 lbs with accessories |
Why Choose VEVOR Welding Kits
VEVOR welding kits have everything you need for all your major welding needs, from joining metals and making things from plastic to connecting fibers and making things for industry. The goal with every kit is to give reliable, steady performance in the harsh conditions of the real world. VEVOR builds high-quality products at reasonable prices and offers great customer service after the sale. Check out all of our welding kits right now to get the right tools for your job, project, or business.
Frequently Asked Questions
What types of plastic can a PVC welding gun weld?
You can use PVC welding guns on most thermoplastics, like ABS, polyethylene, and polypropylene. For the best seal, always ensure the filler rod material matches the base plastic. Before beginning any welding job, ensure the product's material compatibility list is complete.
How do I know which optical fiber fusion splicer is right for my project?
For single-mode fiber applications that require high accuracy and minimal splice loss, choose a core alignment splicer. A cladding alignment splicer is the way to go for faster multimode fiber installs. VEVOR fusion splicers show splice loss numbers right after each splice, so you can check the quality of the connection right away.
What is duty cycle, and why does it matter for a welding machine handheld unit?
Duty cycle tells you how long a welder can run in a ten-minute period before it needs to cool down. A higher duty cycle means that you can weld for longer without stopping. Before buying a handheld welding machine for long-term production work, always check the duty cycle at the amperage you plan to use.
Can VEVOR welding kits run on standard 110V household power?
Standard 110V power can be used with many VEVOR welding kits, which include handheld welding tools and PVC welding guns. Industrial plastic welding tools and spot welders with higher outputs may require 220V. Before you buy something, you should always check the product's input voltage standard.
Can I use a portable spot welder for car repairs?
Yes, for steel body panels such as floor pans, quarter panels and brackets, where factory spot welds are replaced. Check that the panels are carbon steel and within the welder's thickness limit. The 1.5 kVA spot welder handles steel up to one-eighth inch thick.
How do I choose the right spot welding machine for my project?
Match the machine to the metal and thickness, then check your power supply and how many welds you make per hour. For carbon steel up to one-eighth inch on 110 V, the portable spot welder is a compact choice.
What are the main types of spot welders and their uses?
The main types are portable handheld units for repairs, stationary pedestal welders for production and battery spot welders for small electronics. Handheld units suit garages and body shops, like the portable spot welder.
What are the main differences between resistance welding machines and other welding methods?
Resistance welding fuses metal with current and pressure, with no filler, gas or arc. MIG, TIG and stick welding melt filler into the joint. Spot welds are fast and tidy on thin sheet, like those from the portable spot welder.
Can I spot weld stainless steel at home or do I need professional equipment?
Stainless steel needs precise current and timing control, so it usually calls for professional equipment. The portable spot welder on this page is listed for carbon steel only and is not suitable for stainless steel or aluminum.
What safety precautions should I take when using a spot welder?
Wear safety glasses, leather gloves and long sleeves, keep fuel and solvents away and let the tips cool between welds. Respect the duty cycle to avoid overheating. The portable spot welder has a 50% duty cycle.
What are the best tips for achieving strong spot welds?
Clean paint, rust and oil from both sheets, clamp them tightly, keep the copper tips shaped and clean and space welds evenly. Test on scrap first. The portable spot welder suits carbon steel sheet.