Customer Reviews for VEVOR Universal Tracor Seat, Lawn Mower Seat with Micro Switch and Drainage Holes, 16-34 cm Extended Slot Tractor Seat for Tractor Loader Excavator

The original part #s for my Cub Cadet seat was 757-04097 or 757-04008A. I was not able to find a direct match. I ordered Milsco XB200 as it was supposed to work but it didn't. It sat way too high. The one I bought from VEVOR works! It was inexpensive and shipped fast. It is designed for a fork lift, and came with the slide hardware which I did not need. My only negative is that the back is very low, so if you are just sitting in your side by side relaxing, you won't want to lean back in it. But otherwise, it's a winner.

Easy Install, looks good, good tough seat for the money.

Worked as I needed

2e siège pour tracteur avec tout le matériel de fixation requis pour installation.

Comfortable and sturdy. Didn't really need the slide mechanism as the tractor already had this but I was able to install the seat with the slide onto the existing slide. This has the added benefit of giving it an inch or so of additional height and more range back and forth, both of which are welcome.

Didn't like sitting in The hot sun. I was surprised at the quality when it arrived just wished it lasted more than a couple months. The glue failed i think it was the heat

Mounting brackets are not designed very well; poor engineering; they could have made holes and slots to provide much more adaptability for various applications. The construction overall seems very good. However, the pressure switch is normally open; lots of mowers are normally closed including my old Craftsman. Therefore the engine would start but shut down once I sat down and put in gear. There is no real work around since the switch in integrated within the seat. They should have provided a double pole switch so the user could select NO or NC as required. The instructions are worthless. Took a lot of time and imagineering and messing around to to get it to work.

Went right on my old mower. Only had to drill one hole. Looks and fits good. Comfortable enough for what its for. Was disappointed that the supplied bolts for the rails to the seat are about 5mm too long. I was unable to locate the correct size socket head bolt so I ended up adding another 1/8" thick washer to take up the excess length. I expected to have to come up with my own hardware for the bottom rails onto the machine but when it comes with the upper bolts they should be the correct length.

Rugleuning ligt ver achterover

This was a lot less expensive than a Kubota seat. However, for our T1460 mower, I was unable to use the sliding feature and had to bolt it directly to the existing frame. Also, I am used to parking this mower in the open, as a result the sun deformed the plastic strip securing the seat cover.