Customer Reviews for VEVOR Transmission Fluid Pump 2 Way ATF Refill System Dispenser, Oil and Liquid Extractor 10 Liter Large Capacity, Automatic Transmission Fluid Pump Tool Set with 14 Pieces ATF Filler Adapters

Recently bought a 2004 Mercedes CLK 500 Convertible and didn't want to be laying on the floor draining the engine oil. Bought this fluid extractor and used it to drain the oil through the dip stick tube. Worked great with my air compressor! Don't use too much air pressure or the extractor will start to collapse. There is a small valve on the extractor you can use to adjust the air pressure. Since the oil filter is changed from above, I was able to do the entire oil change standing in front of the car. Don't need to worry about the drain plug, crush washer, etc. I'll be using this on all my various engines going forward.

All I did was run the mower a few minutes to warm the oil slightly, then inserted the correct size pickup tube into the oil fil tube and pumped the oil out in about a minute. Worked great, no mess, easy peesey. And I know that the oil does occasionally need to be drained at the bottom to remove all the settled debris. But for a quick clean, no mess oil change, this works great.

My husband used this for an oil change on my Macan. It worked perfectly no issues, he used a compressor at 80psi and took about 10 min to extract the 4.7 litres of oil, less than 30 minutes to extract, and replace filter and refill. Clean no mess no lifting or removing bottom panels. Too bad not all cars put their oil filter on the top side. If your oil filter is under you will still need to lift and go under the car. Well worth the money.

It worked great sucking the fluid out of my transmission through the dipstick tube. I like the fact that it also has a hand pump option. That would be handy if I'm not at an air source. The air option works great though.

I replaced power steering fluid with it. It is so simple to use. Also used to suck some of engine oil from dip stick tube to put lucas oil stabilizer. This is perfect for diy projects.

Holds a lot of fluid. Works well. Appears to be well made.

The Fluid Extractor Pump impresses with its excellent quality and robust construction. The materials used are sturdy and durable, suggesting a long-lasting performance for various fluid extraction tasks. I haven't used it yet, but it looks and feels well-made, instilling confidence that it will handle the job.

Fort pratique pour les changements d'huile

Usage personnel , L’huile du moteur doit être assez chaude. La capacité de l’huile de mon Highlander sans le filtre est de 5,3 litres. Et j’ai pu vider au complet. Merveilleux

Works great on my boat for oil changes. Excellent buy.