Customer Reviews for VEVOR Motorcycle Lift, 500 kg Motorcycle Center Scissor Lift Jack with Saddle & Safety Pin, Steel Motorcycle Jack Hoist Stand for Street Bikes, Cruiser Bikes, Touring Motorcycles

I've had this for 1 years and have had so many issues with it. It works, but does not handle the demands of constant use. If you need something to go up for a time or two great, but if you plan on actually using this regularly, don't trust it. It Continues to fall to pieces Everytime I use it.

manque un frein pour blocage des roulettes

Threaded part failed that lifts the jack. Needs to be built better.

I made an improvement to the product by adding a 3 foot Paracord rope to the safety release locking mechanism making it easier to release the safety bar

Good kit for the price. Came ready assembled - but badly! Everytime I wheel it across the floor it leaves a trail of nuts and bolts.

For the most part it seems okay, but the hydraulic pump cylinder doesn't work as it should. It's as if it has to re-prime every time you use it. You keep pumping and it just doesn't go anywhere. Also, the design of the lever for the pump is really screwy, it hits the wheel every time you pump it, and it hit's the ground before you really get the full stroke in.

The unit is well made and I like that you can take the jacking platform out and use it without the castor tray. The three star rating is because the castors are complete garbage. They do not roll out switch direction nicely with a heavy cruiser. I ordered better castors for it.

works well but description for set up is rather difficult to follow. my biggest issue is that the lift in its folded state is higher than the clearance of my bike from the floor - i have a standard Husqvarna FE250. so you need to lift the front week of the ground to get the back on it. only one inch but why not make the lift a little lower?

What I liked was the promptness of delivery, the communication level of contact throughout the process. Packaging was also good. What I don’t like is the poor build quality and lack of attention to detail. When the article arrived, was unpacked and assembled, there were parts missing. No means of securing the release shaft to its screw. Then the foot pump either didn’t raise the platform or barely worked at all. The pump was losing pressure and wouldn’t raise the platform with normal operation.. Rather than return it to the mainland from Tasmania, I took a look at what might be causing the problem. Here is what I found.. The screw on the release valve seemed to work ok but the foot pump shaft itself seemed very loose in its mount. The problem was in the thread fitting guide nut which screwed into the base plate and through which the plunger passed was loose and had been jammed very tight, probably to compensate for the poor fitment at assembly time. Thread tape and reassembled and now it is working ok. But not great. This reflects poorly on the product and the company and proper quality control would have caught it early before becoming the customers problem. A customer should not have to carry the burden of poor workmanship upon receipt of the goods at any time. I’m scarred by this purchase and advise those considering a purchase of this model to be very suspicious of these things I mentioned above. I eventually got the jack I paid for but not without fixing its problems first.

Too unstable, not safe. Won’t be lifting any motorcycles with this!