Customer Reviews for VEVOR Metal Fuel Container, 20 L, Fuel Jerry Can with Spout and Comfort Handle, 6 L/min Max Flow Rate, Leakproof & Corrosion-resistant Metal Gas Tank Most Cars Motorcycle ATV UTV, Green, 2 Packs

A la première utilisation, les 2 becs verseurs ne sont plus étanches et ne coulissent plus. Les jerrycans en métal sont ok, mais sans les becs verseurs, ils sont inutilisables. Les becs verseurs avec arrêt automatique sont une très bonne idée, c'est ce que je recherchais, mais la qualité est nulle!!! Très déçu!

Was not as advertised.

the safety feature that is used to prevent unscrewing the filler/funnel were broken on both fuel cans IN THE BOX! I have not used these cans yet. If you were counting on this feature to prevent a child from opening the filler, DON'T. This particular feature is very poor! I will be using these cans this weekend as this feature is not needed for my use.

Unfortunately the item got lost in shipping. Never received them.

Dude there where metal shavings in my tank!? What the hell? What if i used this on somthing without a strainer? Cant upload a puc because you guys reqire me to convert the image and make very tiny 🤦‍♂️

It looks like the real Jerry can, but it is thin metal which can't withstand the pressure of expansion with a 30 degree temperature change. I filled it in the morning at 68 degrees and it got up to 96 degrees for a high. the cans deformed to the extent that they do not sit straight, and the sides are bulged out. I also had two 23 year old Jerry cans that I got in Germany and they had no problem handling the pressure. Also the paint runs if you spill a little fuel down the side. The cap locking system is cheap plastic and flies off with in a few uses.

Ordered clamp on metal nozzle gas cans. Got plastic screw on cheap nozzles. Scam

The can is well built and I'm happy with the construction of the base. However, I can't say the same about the spout and seal. It leaks when trying to pour in holding down the childproof button. Ive tired tightening it down as far as it can go, and it still leaks. The spring on the lid popped out on the ratcheting side to tighten down. I feel the plastic and lid seal is poor quality, so if you need to pour out, don't use the childproof spout.

Not a standard Jerry can pouring nozzle it's like a gas can. 1 out of the 4 cans I purchased can't sit flat on the ground. Last it should have side handles so you can pour it easy.

These work and they are cheap. The cans are steel but the screw-necks are molded plastic, so you have to be careful not to knock them around. They have turn-locks to keep from unscrewing, but these fall off the first time you use them. They do have a handy pour-spout that stays closed until you push on it, but it doesn't close after you remove it. If you want to fill a car, you probably need a flexi-funnel or a a VP fuel jug to transfer it to. I prefer the Latvian NATO cans, but they are over $100/ea bought new.