Customer Reviews for VEVOR Liner Puller Cylinder Liner Puller Dry and Wet for 75-138 mm Diesel Engine

Good puller for the price comes with several different types sizes to accommodate different sleeves. Will work with a 1466 international. Beats building one from scrap.

If you need it then this is the one that is affordable AND functional. Worked well after taking upper and lower mounts on motor side loose and jacking up motor high enough.

I like it

Solid well built tool, that will never bend or break if used correctly. Tool pays for itself after one use. Product not carried by Hdepot, HFreight nor AMZ. Shipping was free and delivered in 3! days.Vevor is my new favorite store to browse for tools. and if you ever need an animal strecher they have that too

I own a farm equipment dealership and service center. I needed a sleeve puller so instead of building my own, I purchased this one. We had a old Yanmar tractor in the shop that needed an overhaul so re tested it out on it thinking it was going to take more than just this puller. No issues, We just greased the thrust bearing and threads good on this puller, taking out time, we extracted the 30+ year old sleeves with little struggle. So if your going to work on small bore engines this is a good little sleeve puller.

Very well-built product for the price. Worked flawlessly. Had to pull liners on a Yanmar in a John deere and it was a breeze to pull them.

Pulled sleeves on a JD 6.8L for an In-frame overhaul.The puller did the job.Best features:-- The toggle for the pulling plate. Made inserting the tool quick and easy. The removal of the sleeve without unthreading the handle was easy-- The handle thrust bearing helped a lot. Watch the bearing balls, they are not locked in very well. Dropped and recovered a couple balls.For < $100, not complaining about the minor stuff.These sleeves pulled pretty easy. If a sleeve is stuck hard, keeping the threaded shaft from rotating requires vise grips on the shaft. (little area at the top to clamp on)Grease the threads and oil the thrust bearing, it helps.

Vevor Liner Puller Cylinder Liner Puller Dry And Wet For 75-138 Mm Diesel Engine

Worked good, did the job.