Customer Reviews for VEVOR Fluid Extractor, 6.5 Liters Capacity, Pneumatic/Manual Oil Changer Vacuum Fluid Extractor with Dipstick and Liquid Suction Hose, Oil Extractor Change Pump for Automotive Fluids Vacuum Evacuation

I watched a video of a guy using a tool similar to this one to change his power steering fluid. I used it for the same job and it worked great. You can use this for any fluid change you may need to do on your machines. To use this with an air compressor you probably need at least a 20 gallon one. Not everyone has an air compressor and that is why I like that this also has the option to hand pump it for the vacuum. Anther nice thing about this is when pouring out the fluid it has small spout design to guide where it goes, not just a round hole which could cause it to not pour smoothly. The overall build quality of this is very nice. It feels like it is strong plastic that I don't have to worry about braking easily. This is a good tool to have for anyone that does maintenance on their machines.

Changing the oil just became so much easier with this oil extractor. You just run the tubing down the dipstick tube and suck all the oil out. Works great! No more mess. Recommended!

My lat shop suction tool was a sort of modified grease gun with a hose on the end to suck things out. This too makes that seem completely useless. I love you can either use this manually with the pump. or can use with an air line for the more stubborn fluids to suck up. The first project I used this for was to remove old stale gas from my 4 wheeler, and poured it into my tractor to burn it up. Amazing how easy of a transfer this was. I love how you can just pull the hose and pour out of this tool. It's also really nice it came with several different sizes of hose too. I with I would have gotten my hands on a tool like this years ago!

These guys really know what they're doing on these extraction pumps. They work flawlessly and hold up to all kinds of chemical abuse. I have run oil, brake fluid, dirty water, transmission fluid, coolant, etc. through these without any issues. I like to clean it well after use so it doesn't get gunked up, which probably helps with longevity. I rinse it out with a mild solvent or degreaser and it's good to go for next time. You get a ton of fittings, which is really nice. I haven't used the compressed air fitting on this one yet. I prefer manual mode so I don't have to get my compressor out. Excellent quality that stands tall in comparison with the more expensive brands. Highly recommend.

I am not a fan of changing the oil of yard machinery. Oil drain pans, drips and ultimate messes leave me being somewhat negligent with maintenance. Come to find out there are oil extraction devices available to help with that task, nobody ever told me before but I came across the Vevor system and it's GREAT. Doing a little research I found there are hand pump systems and different styles of pneumatics but many had a larger footprint than what I wanted. The Vevor has a small diameter base, large storage capacity and works via a hand pump or air line. Win, win, win. I needed to get the snowblowers ready for winter so after warming up my Ariens I selected the shorter tube and plugged it into the tank. Took a little effort but resulted in a very tight fit. I connected my air compressor hose to the valve on the tank and then held the suction tube just under the oil dipstick on the machine to catch any drip when I unscrewed the dipstick. As planned, the suction slurped the drip and I then placed the tube down into the engine oil sump. In about 3 minutes total I had more old oil out of the engine than ever before, all without a drop on the floor. I filled the engine with fresh oil and that was it. The tank holds quite a lot so it'll be another 3 or 4 oil changes before I take the tank to my mechanic to properly dispose of the refuse. I don't do oil changes on my vehicles but when I'm due I plan on taking this to the mechanic to have him try it out. I've seen that some shops do oil extraction as a rule now and will be interested to see how much comes out with this method vs draining. The kit comes with enough tubing to get down into truck engines and even if one had to hold the tank I think it could handle some big jobs much easier than convention. Bottom line: well built, quality materials, versatile, no mess, easy to use and I highly recommend it.

Packaging was good. Item appears to be good quality but have not had a chance to use.

delivered on schedule. put it work right away pulling 30wt oil out of a briggs 5hp on a 30 degree day. the suction lines are a bit stiff but worked perfectly using the hand pump, have not tried compressed air option yet. 1/2 the price of items that do the same job at the local tool store that sells all the imported stuff or even the big auto parts stores that sell item that looks very similar.

I use this pump to remove engine oil through the dipstick. Yes, it doesn't complete remove all the oil like you would through the drain plug but it removes 98% of it so it is good enough IMO to drain with the pump in between filter change to same time and mess.

The VEVOR Fluid Extractor, 4 Gallons (15 Liters), Pneumatic/Manual Oil Changer Vacuum Fluid Extractor works as it should . Very easy to use , Easy to clean out after the job is done ready for the next job . What i like about it you can use the pump handle or hook it up to a air . Light weight easy to move around the shop ;

produit conforme à la description sur le site et prix raisonnable. Je pense avoir fait un bon achat pour faire les vidanges sur mon bateau en toute autonomie.