Customer Reviews for VEVOR 6x6 Post Base 2 Pcs, Inner Size 5.9x5.55 inch / 150x141 mm Post Brackets, Heavy Duty Carbon Steel Decking Posts, Wood Posts Brackets for Pavilion Deck Railing Support Deck Base Plate, Black

I was hesitant due to cost and expectation, but I have to say great job vevor. 4 Stainless steel 8x8 post brackets with raised base cover and secondary attachement plate. For the price I was pleased by what I recieved. I would order this again. Honestly I could not buy the materials and cut it for what I paid

I modified the hardware slightly by using Simpson Strong-Tie galvanized fasteners instead of concrete wedge anchors for ease of installation and strength. I also used silicone to prevent galvanic corrosion between the stainless steel and galvanized metals especially in the highly corrosive environment near Florida’s Intracoastal Waterway. Hopefully that will decrease against degradation and extend the lifespan. I wish the vendor would provide the grade of stainless steel. I’m only using them for the stair landing not the main deck level and suspect it’s 304 stainless steel or low grade.

These were ordered due to the cost of name brand versions costing more per piece than I was getting for 4... So the problem is the hardware included is trash. Expected not to use that so no loss there. I wish they would drill or cut the holes larger to fit a normal sized 1/2" or 5/8" anchor bolt since that is what is truly needed here. I ended up drilling the two holes larger for the back up plate and cutting the slot larger to fit a 1/2 anchor bolt and these worked great. Being stainless, they are a pain to drill through, but doable with lots of pressure and some cutting oil. Used a fiber disc to open the slot bigger on the post base since the drill bit would just catch the edges of the slot and bend it violently. Overall, the price was good and everything came packaged well. Threw away the "hardware" included. Wish there was also an option for larger beam sizes including sizes for rough cut lumber.

Great functioning bracket with a very cost effective price. A lot of parts and instructions were a bit difficult to interpret. Instructions are good for a trades person but me be a challenge for a homeowner.

Great Bracket worked and looks great. Only problem was anchor bolts. Were some oddball size not SAE or metric and could not find concrete bit to match size and the bolts were too long and nuts very sloppy on threads and was worried they would strip out so I bought some US made anchor bolts.

These worked great. Good quality and adjustable. The hardware included is definitely on the light side, so I upgraded that for the most part. All in all, I’m pleased with this purchase and would buy them again.

The good: Thick, non-magnetic stainless. I didn't measure the thickness, but substantially thicker gage then galvanized brackets. Fits a nominal 6x6 PT post well with no trimming. The not so good: Edges are not deburred and masking is not removed, some laser spatter is present. Haven't peeled back the paper yet but if you are concerned about looks there may be some pitting. These won't provide a true 1" standoff. They hardware isn't much to write about. If you have real loads then you might want to plan to buy suitable hardware.

Good quality, but as others have said they are not sized for North American lumber. I had to chisel down 1/4” off off my 8x8 posts to make them fit which is a fairly big pain in the A

This bracket does not got a 8x8 wooden post. I had to cut it down for it to fit do not buy for 8x8

These did not work well. They looked good but we're very unstable. Posts would rock the whole bracket.