Customer Reviews for VEVOR 203.2x203.2mm Post Base, 4Pcs Stainless Steel Adjustable Post Anchor Bracket(Internal 198 x 185), Adjustable Post Base for Pavilion Deck Porch Handrail Railing Support Decorative Anchor Plate

Great quality in stainless steel, not galvanized. Packaged nicely. I wish embed bolts were larger diameter. I will try them out. They shorted me a mounting plate, still missing.

These are a fraction of the price of the name brand galvanized ones. The edges are sharp and it took me an hour to pull the plastic off of them. I bought a second set for future use.

I modified the hardware slightly by using Simpson Strong-Tie galvanized fasteners instead of concrete wedge anchors for ease of installation and strength. I also used silicone to prevent galvanic corrosion between the stainless steel and galvanized metals especially in the highly corrosive environment near Florida’s Intracoastal Waterway. Hopefully that will decrease against degradation and extend the lifespan. I wish the vendor would provide the grade of stainless steel. I’m only using them for the stair landing not the main deck level and suspect it’s 304 stainless steel or low grade.

Great functioning bracket with a very cost effective price. A lot of parts and instructions were a bit difficult to interpret. Instructions are good for a trades person but me be a challenge for a homeowner.

Great Bracket worked and looks great. Only problem was anchor bolts. Were some oddball size not SAE or metric and could not find concrete bit to match size and the bolts were too long and nuts very sloppy on threads and was worried they would strip out so I bought some US made anchor bolts.

These worked great. Good quality and adjustable. The hardware included is definitely on the light side, so I upgraded that for the most part. All in all, I’m pleased with this purchase and would buy them again.

The good: Thick, non-magnetic stainless. I didn't measure the thickness, but substantially thicker gage then galvanized brackets. Fits a nominal 6x6 PT post well with no trimming. The not so good: Edges are not deburred and masking is not removed, some laser spatter is present. Haven't peeled back the paper yet but if you are concerned about looks there may be some pitting. These won't provide a true 1" standoff. They hardware isn't much to write about. If you have real loads then you might want to plan to buy suitable hardware.

Good quality, but as others have said they are not sized for North American lumber. I had to chisel down 1/4” off off my 8x8 posts to make them fit which is a fairly big pain in the A

This bracket does not got a 8x8 wooden post. I had to cut it down for it to fit do not buy for 8x8

These did not work well. They looked good but we're very unstable. Posts would rock the whole bracket.