Customer Reviews for VEVOR 15U Open Frame Server Rack, 23-40 in Adjustable Depth, Free Standing or Wall Mount Network Server Rack, 4 Post AV Rack with Casters, Holds All Your Networking IT Equipment AV Gear Router Modem

Be prepared to sweat if you only have hand tools. The screw holes are painted and just right fit so you will need to have a strong arm or a power tool or socket wrench. A few of my rails were scratched and lightly bent. Nothing a little force couldn’t fix. Definitively pay attention and add corner brackets before the top plate. Overall it’s a rack

So far it's good stuff

It feels sturdy now that its built but it was a pain in the ass to build, the instructions don't help much and the screw placement is go awful, but it still gets four stars for being 1/3rd of the price of a star tech rack.

Bonjour, Après plus d'un an d'usage, rack robuste mais les vis autoperforantes font que le démontage et le remontage sont parfois délicats. POINT très NÉGATIF si le rack est lourdement chargé (100kg), les roulettes semblent adaptées pour des charges lourdes MAIS LES SUPPORTS DES ROULETTES se TORDENT très FACILEMENT (tôle trop mince) et vrillent la roulette.

Works great and the price is unbeatable, however the holes in the metal are not threaded and getting the self-threading screws provided into said metal without unintentionally putting them at a super aggressive angle is a nightmare. If they provided tapped holes and bolts that used an Allen key instead of a Phillips head screwdriver this would be a 5/5, but they falter there. Otherwise it is super sturdy and is able to hold my Proliant server along with all my routers & switches no problemo.

The rack itself is nicely made, but as others have mentioned, the M5 holes are not tapped. Although self-tapping M5 screws are furnished, they only work when the holes are perfectly aligned, and none of the corner support holes are. I ended up redrilling to align the holes and purchased some M5 nuts to fasten with the M5 bolts. Since inside corner access is next to none, I have the bolts pointing outwards with the nuts on the outside, and appearance isn't bad at all. As far as the wheels go, they are useless for after installing more than 20 lbs of equipment on them. The wheels are mounted on cross braces, not the frame itself, and the cross brace twists and skews when the rack is rolled. I got rid of those wheels and purchased some nice 4" heavy duty poly casters and mounted them to a 2 foot square piece of 3/4" plywood and placed the rack on top of this platform. Much easier to wheel and the rack is solid after bolting it down to the platform. The M5 bolts worked fine on the top plate but I strongly advise using a power screwdriver unless you have a strong wrist. My power screwdriver had enough torque to work the self-tapping M5 bolts into the frame, only because those holes lined up. Overall a very nice rack if you're resourceful and can work around the gotchas.

Hard to put together.

I was struggling to find something that wasn't $300+ to house all my new networking equipment. This looked perfect for what I wanted to do. Only 4 stars simply due to the screws and hardware not fitting perfectly and some of the assembly needed a little more elbow grease than anticipated, but for the price cannot complain at all. Put this together and had everything mounted properly in an evening. Definitely recommend if you are looking for an inexpensive setup for your precious equipment.

Einfacher Aufbau. Die Qualität ist annehmbar, jedoch war eins der Bohrungen versetzt, weswegen ich selbst ein Loch nachbohren musste.

Was straightforward to assemble, just make sure you have appropriate tools, power tools preferred. Quality is good for the price, not the best but you get what you pay for. Holds all my equipment pretty well, except there is a little flex with my ups. My ups is a three battery 1500 ups so its a little heavier than most. But I put it on the very bottom so its not noticeable. Overall I would buy this again and if its all you need for your homelab or server it works really well. I would recommend it to anyone that only needs a 9u rack.