Customer Reviews for VEVOR 15U Open Frame Server Rack, 23-40 in Adjustable Depth, Free Standing or Wall Mount Network Server Rack, 4 Post AV Rack with Casters, Holds All Your Networking IT Equipment AV Gear Router Modem

Rack pour serveur a très bon prix. Petit problème, le montage. Car faire un montage avec des vis auto perfo ce n'est pas tip top. Ce n'est pas gênant, mais si besoin démontage remontage du rack ça peut le devenir. Sinon très solide rien à dire.

Just the right height for my setup. I need to get a patch panel to make it that much cleaner but it looks pretty ok as is. Very tough little rack made from some ok metal. Wish the wheels had locks though, easy enough to swap out I suppose.

This frame is really good, but please for gods sake change the setup guide the pictures in it are so faded and hard to read. None of the parts are labeled you dont know what is the correct way and the pictures do not help; It was pain to setup and I still have to fix it I have to put the extending rails on the other way I put them backwards because the instructions are garbage.

This is basically a well-manufactured, but light duty portable rack. The instructions could be much better - the printed version is tiny and badly printed. I was disappointed that Vevor don't seem to have an on-link PDF to look at. I ended up working out some of the assembly from images of similar racks on the internet. Once assembled it works well. It can be assembled with or without castors. The large castors and the overall metal gauges suggest the rack will be able significant loads. The supplied shelves are helpful, but very light-weight. They droop under modest loads (~10 lbs), so I'll need to get some that are more substantial for the rack UPS. Overall, and especially for the price, it's pretty unbeatable!

The metal plate that goes on the top was pretty badly damaged, the corner was bent meaning the plate had to be orientated in a certain way7 or it wouldn't fit. There is a lot of scrapes on the top plate. Everything else was alright, though the screws requiring an hex key is annoying, just use regular flat/phillips head screws.

Great piece of equipment, it did not disappoint, the metal uses good quality. The only complaint is it is a little hard to put together and also a little hard to figure out how long to make it. But once your past that its great, I have two servers and a dream machine pro on it with no issues. This could also be used for sound equipment which would be nice since it comes with wheels to move it around easier. Overall great product!

This is a decent rack, especially for how little it cost I can't complain much. Although I'm about to describe what I didn't like about it, I would buy this rack again if I needed a second one. For about a third to a quarter of the cost for something of comparable size elsewhere, it's worth making a few adjustments to make it work. First thing, although this rack is(I think) rated for around 500 pounds, the casters and caster plates don't do well with any real weight. The caster pins and the mounting plate were both bending badly while I was getting it loaded up, and I ended up just removing the casters altogether and bolting the rack to a large 1200lb Harbor Freight furniture moving "skateboard", and it works great. Second thing that I didn't expect but should have, the vertical rails are a bit thinner than the more expensive racks, and bend easily with unsupported cantilevered loads, even light ones. This rack will definitely need server mount rails, or a mixture of the rails and fabricated shelves like I did. It's a pretty solid little rack, and is doing well. I configured mine as 28" depth, so the top cover plate doesn't cover the whole top, but I use the top as a place for my 3D printer enclosure. If you're networking on a budget, this is a good rack to get started.

Easy to assemble, shipped quickly in a flat pack with many parts preassembled. Flexible size. Only small improvement I could suggest is that the screw holes (there area a lot of them) are tapped most of the way through, but the first time screwing them together takes some strength to get through the last bit or the hole. It feels like a hard stop and the screw has to cut the last tiny bit of the thread. top is sturdy enough to hold up a monitor, or some other equipment. If the screw holes went all the way through I would have given it 5 stars.

I like the brand. It’s affordable and made of good metal. I have garage shelves from this brand and now this as well. My best advice for anyone buying it: get an impact driver—without it... good luck and my condolences

Good and strong material