Customer Reviews for Industrial Sewing Machine Motor 750W +Needle Position Energy Saving Servo Motor

Unit received was Vevor not Mophorn. However, easy to install, great instructions for functions. Superb servo motor. Many adjustment parameters make it fit your particular needs well.

Good for more than just a sewing machine. I installed it on an antique pottery wheel and its works perfectly, with only a few modifications. Very strong. Works better and is stronger than the motor that came on my new pottery wheel.

Bolts right in place of the heavy old clutch motor. Everything provided in the kit. I swapped pulleys to the smaller one (included). Lot's of confusion on speed in the various reviews. Speed is either off or 400 and up. Unfortunately it won't crawl at 100 or 200. The starting speed is a brisk 400 rpm and can increase as you press farther down on the pedal. The speed setting is the limit only. Set it for 1000 and it will go from 0 to 400 then increase up to the 1000 max you set. Otherwise it works great and a huge improvement I should have done earlier.

It's powerful and easy to install like any motor. only gripe is the minimum speed is 500spm and that's too fast for me when the stitchwork needs to be precise. Best to use with a speed reducer!

Nothing to not like.This motor improved my business

Love the torque and speed

I received the servo motor/controller with needle positioning sensor a few days ago. Shipping took a little over a week. The packaging was good and equipment in excellent condition. I have a PFAFF 138 6/21 and I was able to mount onto the table with the original bolts. Installation was simple and only took a couple hours but could have been faster (needed to make a couple adjustments ). I ended up using the smaller pully that came in the box (I believe is 50MM). with the smaller pully installed on the motor the belt ended up being a little too long. Potentially a person can get a smaller belt or lower the motor. I was able to use the clutch motor rubber mounts that I removed from the Clutch motor mounting bracket and attached them to the servo motor mounting bracket. I then used the supplied rubber bracket mounts as shims to help drop the motor down approximately 1/2" so the belt I had would work with the smaller pully. I then attached the belt and all worked well. Two bolts came with the needle positioning sensor to attach the mounting spindle to the sewing Machine. Unfortunately neither work with the PFAFF and I needed to get another screw to bolt it on (Not the same as what you can find at a hardware store as the PFAFF screw is a touch smaller) Where the positioning sensor sits. Once mounted I had to install my own needle position sensor stabilizing hardware as the equipment provided was not made for the PFAFF 138. Unfortunately, for most machines the needle positioning mounting hardware will interfere with the bobbin winder.The motor and controller work great but as others have mentioned the manual does not show how to mount and for some could be difficult to follow. The lack of information in the manual is the only reason for the 4 star review. With the smaller pully and the adjustments that can be made with the controller, the needle can crawl or go as fast as a person would want.Hopefully this helps.

It's really nice to have a option to slow the machine down when a mistake isn't a option. I can now turn the speed down to 500 and my Juki lu562 just gracefully gets the job done. Thanks Guys!!!

I am very happy with this product. It took awhile to get the issue resolved, but the customer service was very good. There was an issue with the needle positioner and they took care of it.

I like the power and the low noise, for me was very easy to installI would like it start with very low rpm to do slower stitching to have better control