Select the country/region, language, and currency you prefer for shopping.
VEVOR Hydraulic Hose 0.97 cm Hydraulic Oil Hoses 100m Maximum Pressure 5000 PSI
(59)
504.9
504.99
Deal after registering
Member discounted price
0% cash back at checkout.
504.9
Non-PRO Account
504.9
Save
Non-PRO Account
101 Views Recently
You May Also Like
Recently Viewed

Results for  Other Auto Parts

Other auto parts are the supporting replacement and upgrade components that keep a vehicle's major systems working and let an owner change how it performs. Each one either restores a function that has worn out or adds a capability the factory build did not provide, operating inside the systems that move, stop, steer, and power the vehicle. Some bolt in to take the place of an original part at the end of its service life, while others fit alongside existing hardware to improve output, control, or feel. Choosing and fitting the correct component returns a system to proper operation or extends what it can do.


VEVOR groups these components by the system each one serves. Hydraulic hoses and braided fuel lines move pressurized fluid, with the hoses rated from about 3,100 to 5,800 PSI, while the auto exhaust silencer system range covers electric cutouts, tips, mufflers, and pipe kits in sizes from roughly 2 to 6 inches. Suspension lift kits raise front ride height by about 2 to 3 inches, auto rack and pinion assemblies rebuild worn steering, and cam kits reset valve timing on specific engine families. Broader automotive parts add tools, consoles, and body trim. Typical uses are exhaust upgrades, truck leveling, steering repair, hydraulic plumbing, and engine performance work.


Five things decide what you need:


  • Vehicle system: identify which system, exhaust, suspension, steering, hydraulic, or engine, needs the part.
  • Fitment type: confirm whether the part is universal, sized by dimension, or vehicle-specific, matched to year, make, and model.
  • Key measurement: take the figure that defines the fit, such as pipe diameter, hose inside diameter, or engine code.
  • Installation effort: account for the tools, time, and any alignment check the job requires.
  • Material and rating: check the construction and the pressure, temperature, or load the part must handle.

Browse the full Other Auto Parts range to match the right component to your vehicle, or open the wider Auto Parts catalog for related systems. Confirm fitment, then order the part you need today.


Other Auto Parts Types at a Glance


The table below sets the main categories side by side so you can see how each one is matched to a vehicle and installed.


Type Primary Function Fitment Basis Installation Approach Selection Note
Electric exhaust cutout Bypasses the muffler on demand for louder sound and freer flow Universal, sized by exhaust pipe diameter Clamps or welds inline, wired to a remote, DIY-friendly Pick for on-demand volume without re-piping the exhaust
Front leveling lift kit Raises front ride height to level the stance Vehicle-specific by year, make, model, drivetrain Factory mounts and hand tools, alignment check after Choose the exact truck fit and lift height first
Auto rack and pinion Converts steering input into wheel movement Vehicle-specific by year, make, model, drivetrain Under-vehicle removal and refit, realign after Confirm trim and drivetrain before ordering a unit
Hydraulic hose and fuel line Carries pressurized fluid between system parts Universal, sized by diameter, length, fittings Cut to length and add end fittings, no vehicle lookup Match inside diameter, pressure rating, and fitting size
Cam kit and camshaft Sets valve timing and lift for the engine Vehicle-specific by engine family and OE number Engine teardown and timed install, break-in required Match engine family and your performance goal

VEVOR Other Auto Parts for Exhaust, Suspension, Steering, and Performance Upgrades


Are you searching for auto parts for a variety of vehicle types and applications, including performance exhaust upgrades, suspension leveling, steering rebuilds, and hydraulic system maintenance? For performance builders and working technicians, VEVOR offers cam kits, hydraulic hoses, auto rack-and-pinion assemblies, electric exhaust cutouts, and front leveling lift kits. Locate the ideal component for your car and use it right now.


Auto Part Types and the Vehicle Applications Each One Serves


The basis of a successful repair or upgrade is matching the appropriate component to your vehicle's make, model, and intended application. Each category of automotive parts serves a specific vehicle system. With a wide range of vehicle compatibility, VEVOR's other auto parts lineup covers exhaust, suspension, steering, and hydraulic systems.


Electric Exhaust Cutouts for Performance and Sound Control


An electric exhaust cutout is a motorized valve installed in the exhaust pipe between the engine and the muffler, allowing the driver to bypass the muffler on demand by diverting exhaust gases through an alternative exit point that produces a significantly louder, more aggressive exhaust note than the muffled standard routing. VEVOR electric exhaust cutouts use a butterfly valve mechanism driven by an electric actuator motor that opens and closes the cutout port via a remote switch or controller mounted within reach of the driver, giving full control over exhaust sound and exhaust back pressure without leaving the vehicle.


The reduced exhaust back pressure created when a VEVOR electric exhaust cutout is opened produces a measurable improvement in exhaust gas scavenging efficiency that can increase top-end power output on performance engines, making electric cutouts a popular modification among track day enthusiasts and performance car builders who want both sound control and a measurable performance benefit from a single modification. Stainless steel construction on VEVOR electric exhaust cutout bodies resists the high-temperature corrosion and condensation-driven rust that exhaust system components experience continuously during vehicle operation, maintaining the valve mechanism's sealing performance and electrical actuator reliability through extended use in the harsh thermal and chemical environment of the exhaust system.


Front Leveling Lift Kits for Trucks and SUVs


A front leveling lift kit raises the front suspension height of a truck or SUV to match or approach the factory rear suspension height, correcting the nose-down rake that most stock pickup trucks carry due to the heavier engine and drivetrain weight at the front axle compared to the lighter unloaded rear. VEVOR leveling lift kits use precision-machined spacers or replacement strut extensions that install within the factory suspension geometry, without requiring major suspension modifications, producing a level stance that improves the vehicle's visual proportions and creates clearance for larger-diameter tires that would otherwise contact the wheel arch during full suspension travel.


The improved ground clearance provided by a VEVOR leveling lift kit benefits off-road driving by increasing the approach angle at the front of the vehicle, reducing the risk of the front bumper and air dam contacting rocks, ruts, and trail obstacles that the stock ride height brings into contact range. Installation of VEVOR leveling lift kits uses existing factory mounting points and hardware in most applications, allowing installation with common workshop tools without specialized alignment equipment or frame modification, making leveling kits accessible as a straightforward DIY modification for competent vehicle owners.


Auto Rack and Pinion Assemblies for Steering System Rebuilds


An auto rack and pinion assembly is the central component of a vehicle's steering system, converting the rotational input from the steering wheel into the linear movement that turns the front wheels left and right, and its condition directly determines the precision, feel, and safety of the vehicle's steering response during normal driving and emergency maneuvers. VEVOR auto rack and pinion assemblies are remanufactured or new-build units that restore steering precision lost to the internal wear, seal failure, and fluid leakage that develops in high-mileage original rack and pinion assemblies as internal components wear beyond the tolerances required for accurate, play-free steering response.


Remanufactured rack-and-pinion units from VEVOR use replacement internal seals, updated bearing specifications, and precision-measured rack-to-pinion clearances to restore the steering feel and responsiveness of the original assembly when new, addressing the vague, wandering steering and power steering fluid leaks that worn original units produce during the final stages of their service life. Correct vehicle-specific fitment is the most critical selection criterion for any rack-and-pinion replacement, and VEVOR provides clear vehicle compatibility information for each rack-and-pinion assembly, allowing buyers to confirm correct application before purchasing rather than discovering a fitment mismatch during installation.


Hydraulic Hoses and Cam Kits for Maintenance and Performance


Hydraulic hoses are flexible fluid conduits that connect fixed hydraulic system components, including pumps, cylinders, and control valves, through articulating, vibration-prone connections that rigid pipe cannot accommodate in vehicle and equipment applications where relative movement between connected components occurs during normal operation. VEVOR hydraulic hoses use reinforced construction with inner tube materials compatible with common hydraulic fluid types, braided or spiral wire reinforcement layers that contain operating pressure without expansion, and outer jacket materials that resist the abrasion, ozone, and petroleum product exposure that vehicle and equipment installations subject hydraulic hoses to continuously during service.


Cam kits for engine performance applications include replacement camshafts, lifters, timing components, and associated hardware that collectively optimize the engine's valve timing and lift characteristics for improved power output, throttle response, or fuel efficiency, depending on the cam profile specification selected for the specific performance goal. VEVOR cam kit components use metallurgical specifications appropriate for the engine application, with camshaft lobe hardness and surface finish selected to minimize wear at the lifter contact interface, where the majority of camshaft service life is determined during the critical initial break-in period following installation.


Matching Other Auto Parts to Your Project


Start from the job rather than the part, and this table points you to the component and the one figure to confirm before buying.


Project or Repair Goal Priority Part Key Figure or Code to Confirm Fit What to Watch For
Add on-demand exhaust volume Electric exhaust cutout Exhaust pipe outside diameter at the cut point Oversizing the valve causes leaks at the clamped seal
Fit larger tires and level a truck Front leveling lift kit Year, make, model, and 2WD or 4WD Recheck alignment or the front tires wear unevenly
Fix wandering or leaking steering Rack and pinion assembly Trim level and drivetrain for exact fitment Wrong trim means ports and mounts will not line up
Replumb a hydraulic or fuel circuit Hydraulic hose or fuel line Inside diameter, pressure rating, fitting size Underrated hose can burst at peak system pressure
Restore or sharpen engine response Cam kit or camshaft Engine family and OE casting number Skipping break-in shortens new camshaft service life

Material Quality and Performance Features Across VEVOR Other Auto Parts


How long VEVOR auto parts remain in service and how well they enhance vehicle performance beyond the baseline of the original components they replace or augment depend on the materials and performance attributes incorporated into each component.


Steel, Stainless, and Alloy Construction Across Auto Part Categories


The choice of materials for automotive parts directly affects their ability to withstand exposure to corrosive fluids, mechanical stress, temperature cycling, and the road environment throughout their service lives. To avoid the warping and corrosion that mild-steel exhaust components experience after only a short period of frequent use, VEVOR electric exhaust cutout bodies use stainless steel alloys that retain their structural integrity and corrosion resistance at the high temperatures exhaust pipe walls reach during prolonged high-power operation.


Front leveling lift kit spacers from VEVOR use billet aluminum or high-strength steel machined to precise dimensional tolerances that ensure correct fitment and alignment within the factory strut tower geometry, producing the intended ride height increase without the misalignment that imprecisely manufactured spacers introduce into the suspension geometry. Hydraulic hose reinforcement wire specifications in VEVOR hoses match or exceed the pressure ratings of the original equipment hoses they replace, confirming that the replacement hose safely contains the operating pressures of the hydraulic system without the risk of pressure-related failure that underrated replacement hoses present during peak system demand.


Performance Features and Fitment Verification for Every Application


VEVOR auto parts feature performance enhancements that actively improve vehicle performance in the areas each part addresses, going beyond mere replacement of worn components. VEVOR electric exhaust cutouts offer true exhaust system flexibility, enabling the vehicle to operate silently in residential and noise-restricted environments while delivering full-performance exhaust characteristics when conditions allow unrestricted operation. This goes beyond a simple sound change.


Vehicle fitment verification is the most important step in any auto parts selection, and VEVOR provides detailed compatibility information, including year, make, model, and trim level specifications for parts where vehicle-specific fitment is required, and standard dimension and connection specifications for universal-fit components like hydraulic hoses where the correct selection is based on hose diameter, length, and end fitting specification rather than vehicle application lookup. Verifying proper fitment prior to purchase avoids the installation delays, extra expenses, and possible safety hazards that come with installing car parts that are functionally or dimensionally incompatible with the particular vehicle they are being fitted to.


Best-Seller Comparison


These five listings appear at the top of the category in the catalog compared to the specifications that separate them.


Product Type Diameter or Inlet Length or Size Max Pressure Temperature Range Best For
Hydraulic Hose 3/8 in, 4800 PSI Hydraulic hose 3/8 in 100 ft 4800 PSI -20°C to 140°C Mid-size bore balancing flow and pressure for general runs
Hydraulic Hose 1/2 in, 4000 PSI Hydraulic hose 1/2 in 100 ft 4000 PSI -20°C to 140°C Widest bore here, higher-flow circuits on larger equipment
Hydraulic Hose 328 ft, 5000 PSI Hydraulic hose 3/8 in 328 ft 5000 PSI -40°F to 250°F Longest roll and widest temperature span, bulk shop plumbing
Hydraulic Hose 1/4 in, 5800 PSI Hydraulic hose 1/4 in 100 ft 5800 PSI -20°C to 140°C Highest pressure rating, compact high-pressure control lines
Elbow Exhaust Tip 4 in Inlet Exhaust tip 4 in inlet, 6 in outlet 23 in overall / / Only exhaust piece here, a turn-down finish for tailpipes

Why Choose VEVOR Other Auto Parts?


For performance builders, working technicians, and do-it-yourself car owners, VEVOR offers a comprehensive selection of other auto parts, including electric exhaust cutouts, leveling lift kits, rack-and-pinion assemblies, hydraulic hoses, and cam kits. Every component combines low pricing, useful performance features, and high-quality material construction to make professional-grade automotive parts affordable for all budgets. Backed by VEVOR's reliable after-sales support, your parts are designed to deliver long-term, reliable vehicle performance. Look over the entire selection now.


FAQs


Will a front leveling lift kit affect my truck's ride quality or alignment?


A correctly installed VEVOR leveling lift kit produces minimal changes to ride quality on most trucks, as the spacer design operates within factory suspension travel limits. A wheel alignment check after installation is always recommended to confirm caster and camber settings remain within manufacturer specifications for safe, even tire wear.


How do I know which electric exhaust cutout diameter fits my vehicle?


Measure the outside diameter of your exhaust pipe at the intended cutout installation location. VEVOR electric exhaust cutouts are available in standard pipe diameter sizes. Match the cutout diameter to your pipe measurement for a correct clamped installation without the exhaust leaks that a mismatched diameter produces at the cutout body seal.


When should rack and pinion assemblies be replaced?


Replace rack and pinion assemblies when steering shows excessive play, wanders without input, produces knocking or grinding sounds during turning, or when power steering fluid leaks are traced to the rack seals. VEVOR rack and pinion assemblies restore factory steering precision at a significantly lower cost than dealer-sourced new assemblies.


What hydraulic hose specifications do I need for a replacement application?


Identify the inside diameter, overall length, end fitting type and size, and working pressure rating of the original hose before selecting a replacement. VEVOR hydraulic hoses are specified with all four parameters, allowing direct comparison against the original hose specification to confirm the replacement hose meets all dimensional and pressure requirements for safe and reliable system operation.


What are the most reliable automotive supplies for car maintenance?


The most dependable maintenance supplies are the wear items a vehicle uses continuously: hoses, steering components, suspension hardware, and engine timing parts. VEVOR covers these across its other auto parts range, with pressure, material, and fitment details listed so you can match each part to its system.


Where can I find reliable everyday auto parts online?


Buy everyday parts from a supplier that publishes full specifications and fitment data for each listing. The VEVOR auto parts catalog spans exhaust, suspension, steering, hydraulic, and engine components, with compatibility and dimension details on every product page so you order the correct item once.


Where can I buy high-quality hydraulic hoses and rubber parts online?


VEVOR stocks rubber hydraulic hoses with high-tensile steel wire braid in a range of diameters and pressure ratings. Browse the hydraulic hoses selection, then confirm the inside diameter, length, pressure rating, and end fittings against your system before ordering a replacement or a bulk roll.


What are the main types of hydraulic hoses and their uses?


Hydraulic hoses are grouped mainly by reinforcement and bore. Braided steel-wire rubber hoses handle general medium to high pressure circuits, while braided fuel line kits carry oil, gas, or diesel. Larger bores favor higher flow and smaller bores suit compact high-pressure control lines, so match the type to your working pressure and flow.


How do I choose the right cam kit for my car's engine build?


Start with your engine family and the original equipment part number, then pick a cam profile that matches your goal, whether that is low-end torque, top-end power, or efficiency. VEVOR cam kits list compatible engines and included hardware, so verify fitment and plan a proper break-in before installing.


Tips & Inspiration