VEVOR offers a wide range of lamp parts, well-organized and carefully selected to meet the needs of any repair, restoration, or custom lighting project. Our selection includes everything a homeowner, electrician, or lighting enthusiast could need, from lamp sockets and lamp rewire kits to lamp harps, lamp finials, lamp bases, and lamp bushings. VEVOR lamp parts give you the quality, compatibility, and value you need for your project, whether you're restoring an old floor lamp or making a custom table lamp from scratch.
Is your favorite lamp flickering, fraying, or just falling apart, but you don't want to throw it away? With the right lamp parts, you can make almost any old or new fixture look and work like new again. From the base up, VEVOR's lamp parts range includes lamp sockets, lamp cord & wire, lamp extension cords, lamp harp saddles, lamp finials, lamp knobs, lamp bushings, and lamp bases. This means you can get most of what you need for complete lamp repair or creative custom assembly in one place.
Before starting repairs or building, you need to know what each lamp part does and where it goes in your fixture. VEVOR's full catalog includes structural, electrical, and decorative parts, so you can be sure to find exactly what you need.
The lamp socket is one of the most important parts of any lamp. It holds the bulb, connects the electricity, and turns the power on and off. The most common reason for flickering, buzzing, or nonworking lamps is a worn or broken lamp socket. One of the most affordable repairs a homeowner can make is to replace it. VEVOR lamp sockets come in standard medium-base, candelabra, and mogul styles, so they work with a wide range of lamps and bulbs.
A lamp rewire kit has everything you need to replace the entire electrical pathway from plug to socket for lamps with damaged or unsafe wiring throughout the fixture. Even if you don't have a lot of experience with electrical work, you can easily rewire a lamp with a VEVOR lamp rewire kit. It comes with pre-wired cord sets, replacement sockets, and all the hardware you need. Lamp sockets and lamp rewire kits are the basic parts that make lamp restoration safe and reliable.
It's easy to forget about the electrical cord that runs through your lamp until it starts to show signs of wear. If the insulation on your lamp cord is frayed, the wiring is stiff or brittle, or the cord jacketing is discolored, you need to replace it right away. VEVOR's lamp cord & wire come in a variety of gauges, colors, and jacket materials to meet both practical and aesthetic needs. A twisted cloth-covered lamp cord works well with vintage and decorative lamps, while a standard SPT-1 and SPT-2 vinyl cord works well with everyday lamps.
A lamp extension cord solves a different problem: it lets you reach the nearest outlet without rewiring the lamp's interior. VEVOR lamp extension cords feature connectors and cord gauges designed for typical lamp types and are rated to safely handle the wattages most lamps use. VEVOR's cord and wire lamp parts are useful and safe for any situation, whether you need to rewire everything or need more reach.
Not all lamp parts are electrical; some are equally important to the finished fixture. The lamp harp saddle is the metal bracket that clips onto the lamp socket and holds the harp in place. Without it, your lampshade won't stay in place. Most home lamp sockets can fit VEVOR lamp harp saddles, which come in common standard sizes. They are easy to install and don't need any tools.
The lamp harp itself sits in the saddle and holds the shade up from below. The lamp finial screws onto the top of the harp to keep the shade in place. There are many finishes for VEVOR lamp finials, including brushed nickel, antique brass, oil-rubbed bronze, and polished chrome. This feature makes it easy and inexpensive to change a lamp's look without buying a new one. One of the easiest ways to update a lamp's look is to change its finials.
VEVOR has all the structural and mechanical parts you need for both fixing and making lamps. Lamp bases are the heavy bases that keep any floor or table fixture stable and upright. VEVOR lamp bases are available in heights, diameters, and materials, including ceramic, metal, and resin, to support a wide range of design styles. Lamp knobs are the small but important rotary switches that turn the lamp on and off and, where applicable, dim it right on the socket body.
VEVOR lamp knobs are the right size for standard socket shells and come in a variety of finishes to match your fixture hardware. Lamp bushings are the threaded fittings and sleeves that connect lamp pipes, sockets, and bases. They make a strong internal structure that keeps a lamp assembly together. VEVOR lamp bushings are made to standard threading specifications so that they will work with most residential lamp hardware setups.
Finding the right lamp parts is more than just knowing what part you need. You also need to make sure the working part fixture is working properly and that you choose the right material. These are both important factors that can make or break a repair.
Before buying any lamp parts, make sure you know the key details of your current fixture so they fit properly. The most important things to think about when choosing a lamp socket are the bulb base type (medium E26, candelabra E12, or intermediate E17) and the socket shell size, which tells you which lamp knobs and outer shells will fit correctly. Lamp harp saddles must fit the size of the socket's saddle clip, and the height of the lamp harps must match the size of your shade.
When choosing lamp cord and wire for a rewire kit installation, make sure the wire gauge matches the lamp's maximum wattage rating. For example, 18-gauge wire is commonly rated to handle up to 300 watts, while 16-gauge wire is typically used for higher-wattage fixtures. VEVOR lamp parts listings include detailed specifications and compatibility notes, making it easy to check the hardware on your fixture before adding items to your cart.
Choosing the right materials for all types of lamp parts is important for both the durability of functional parts and the consistency of decorative parts. When buying electrical lamp parts like lamp sockets, lamp rewire kits, and lamp cord & wire, make sure to choose UL-listed parts with insulation that can handle heat and contact points that won't rust. Lamp sockets with brass and copper contacts work better and last longer than those with lower-quality alloys.
When it comes to decorative lamp parts like lamp finials, lamp knobs, and lamp bases, the material's finish is the most important factor. VEVOR sells these parts in a range of finishes, from classic antique brass and bronze to modern brushed nickel and matte black. It lets you maintain the look of your fixture. Whenever possible, choose solid brass or steel for lamp bushings and structural hardware. It is because threading will last longer with these materials than with lower-quality zinc or plastic, which may wear out more quickly when you put them together and take them apart again.
VEVOR's lamp parts collection has nearly everything you need in one place: lamp sockets, lamp rewire kits, lamp cord & wire, lamp extension cords, lamp harp saddles, lamp finials, lamp bases, lamp knobs, and lamp bushings. Every product is designed to fit standard fixtures, priced reasonably for both single repairs and large restoration projects, and backed by VEVOR's reliable after-sales support. Check out the entire VEVOR lamp parts line today to ensure your fixture looks and works its best.
Yes. VEVOR lamp rewire kits include pre-wired parts and easy-to-follow instructions for people who want to do it themselves. You only need a few basic tools, like a screwdriver and a wire stripper. Before you start any rewiring work, always make sure the lamp is completely unplugged.
Check the base type on your current bulb. The E26 medium base is one of the most common types for standard lamps. If you're replacing the shell, measure the diameter of the socket shell. The VEVOR lamp socket listings include compatibility information to help you find the right one before you buy.
Most lamp finials use a standard ¼-27 threaded post, which fits the vast majority of lamp harps sold in North America. Before you order, make sure you know the top post thread size on your harp so your lamp finials fit tightly.
For most standard table and floor lamps up to 300 watts, an 18-gauge SPT-1 cord is sufficient. Use 16-gauge SPT-2 wire for fixtures that draw more power or for longer cords. VEVOR lamp cords and wires are rated by wattage to make it easy to choose the right one.
Lamp bushings are threaded pieces that connect the pipes, sockets, and bases inside a lamp into a single, strong unit. They make sure all the lamp's parts are in the right place and remain safe while in use. The threading on VEVOR lamp bushings is standard, so they work with a wide range of fixtures.
