6. If the machine will not be used for an extended period (3 days or more), please draw a small amount of lubricating oil into the machine after cleaning to prevent water residue from accumulating inside the pump body and causing the steel balls to seize.
If this response does not resolve your current issue, please contact us again for assistance.
By vevor
3. After using the machine, do not clean it with thinner immediately. Wait 10 minutes before cleaning to prevent overheating and to avoid the thinner corroding the seals inside the pump.
4. If possible, we recommend cleaning with diesel or kerosene.
5. After cleaning the pump with thinner, rinse it with water to prevent the thinner from remaining inside the pump for an extended period, which could damage the pump.
By vevor
Here are some precautions for using and cleaning the machine:
1. Before each use, apply 2–3 drops of lubricating oil to the oil port.
2. During operation, monitor whether the machine is running continuously (listen for the sound). If it starts and stops intermittently, check that the trigger release pressure is at 3,000 PSI and verify the nozzle model.
By vevor
