Select the country/region, language, and currency you prefer for shopping.

Car Cell Phone Accessories

Results for  Car Cell Phone Accessories

Car audio accessories are the components that upgrade how sound is produced, controlled, and heard inside a vehicle. They take a source signal, strengthen it, shape its tone, and turn it into clean, audible sound throughout the cabin, while also managing device pairing and media playback. Some parts generate the deep low-frequency output a basic system cannot, others increase the power delivered to each speaker, and others serve as the control surface that selects, streams, and displays media. Together they lift a standard setup past its limits, giving a vehicle higher volume without distortion and the connectivity modern listening depends on.


VEVOR organizes its range into a few core types. Slim under-seat car subwoofers slide beneath a seat and carry 240 to 800 watts, while larger 12 inch car audio subwoofers and loaded bass packages reach up to 1,200 watts RMS for trunk builds. Car mono amplifiers run from 400 to 3,000 watts RMS to drive those subwoofers, and 2, 4, and 5 channel multichannel amplifiers power full-range speakers. CarPlay screens and wireless car stereo units bring Apple CarPlay and Android Auto to older dashboards. Typical uses are adding bass to a daily driver, powering a full component system, and bringing smartphone navigation to a factory cabin.


Five things decide what you need:


  • Component type: decide whether you are adding bass, powering speakers, or adding smartphone connectivity, since each job uses a different device.
  • Power rating (RMS): compare continuous RMS watts rather than peak figures, and match an amplifier's output to the speaker or subwoofer it drives.
  • Impedance: confirm the amplifier stays stable at your subwoofer's ohm load, because a mismatch can overheat and damage it.
  • Installation space: measure under-seat clearance, trunk room, and dashboard depth before buying, so the component actually fits where you plan to mount it.
  • Connectivity: choose between a portable screen and a flush-mount double-DIN unit based on how much wiring work you want to take on.

Browse the full car audio accessories range to compare every subwoofer, amplifier, and screen in one place, or go straight to the under-seat subwoofers for the easiest bass upgrade. Order today and transform your cabin sound.


Car Audio Accessories Types at a Glance


Use this overview to see what each component type does, how much power it handles, where it goes, and when it is the right pick before you compare individual models.


Type Main Function Typical Power Range Install Location Selection Note
Under-seat car subwoofer Adds bass from a slim sealed box with its own amp 240 to 800 W peak Beneath a front or rear seat Best when trunk space is limited and bass needs stay moderate
Car audio subwoofer / bass package Delivers the deepest, highest-output low end Up to 1,200 W RMS Trunk, in a ported or sealed enclosure Choose when maximum output matters more than cargo room
Car mono amplifier Supplies continuous power to one subwoofer channel 400 to 3,000 W RMS Flat panel near power and ground Match its RMS output to the subwoofer it will drive
Multichannel amplifier (2 to 5 channel) Powers several full-range speakers, some with a sub channel 2 x 300 up to 4 x 500 W (4 ohm) Trunk floor, side panel, or under a seat A single-chassis way to run speakers and a sub together
CarPlay screen / wireless stereo Adds smartphone display, navigation, and streaming Not power-rated (head unit) Dashboard or head-unit opening The pick for connectivity rather than extra loudness
Price
50 ~ 100
100 ~ 200
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
VEVOR Monoblock Car Amplifier, 800W RMS MAX, 1/2/4 Ohm Stable, 1-Channel Class D Car Audio Amplifier with Remote Subwoofer Level Control, Low Pass Filter, Bass Boost & Phase Shift, Volume Controller
(84)
123.9
120.99
Deal after registering
Member discounted price
0% cash back at checkout.
123.9
Non-PRO Account
123.9
Save
Non-PRO Account
You May Also Like
Recently Viewed

VEVOR Car Audio Accessories for Upgraded Sound and Connectivity in Every Vehicle


Do you want to add wireless smartphone connectivity to an older car without replacing the dashboard entirely, or are you sick of flat, lifeless factory audio that doesn't deliver the bass, clarity, and volume your music deserves? The in-car listening experience can be transformed from background noise control to true audio enjoyment with the correct car audio accessories. VEVOR offers the ideal modification for every car and audio objective, from wireless car stereos and CarPlay screens to strong car audio subwoofers and multichannel amplifiers.


Choosing Car Audio Accessories by Component Type and Installation Location


The two choices that most directly affect whether a car audio upgrade blends seamlessly into the interior of an existing vehicle or creates installation challenges are component type and installation location. With explicit installation position instructions for each product type, VEVOR's car audio accessories are arranged by component category.


Under Seat Car Subwoofers and Car Audio Subwoofers


Subwoofers add the physical impact and musical depth that separate a truly satisfying car audio system from one that is just louder than the factory installation by accurately reproducing the low-frequency bass content that factory speakers and even aftermarket full-range speaker upgrades cannot deliver. With shallow-mount driver designs that fit within the typical under-seat clearances of most passenger cars, SUVs, and trucks, without requiring trunk space or custom enclosure fabrication, VEVOR under-seat car subwoofer models are specifically engineered for installation in the constrained space beneath front or rear vehicle seats.


For trunk installations where maximum bass production and low-frequency extension below 35 Hz are crucial, VEVOR's line of car audio subwoofers includes larger 10-inch and 12-inch speaker types in ported and sealed enclosure configurations. From 200 watts for small under-seat versions to 1,200 watts for large-format dual-voice-coil trunk subwoofers intended for high-output systems powered by specialized mono amplifiers, VEVOR's subwoofer range offers peak power handling. Both 2 ohm and 4 ohm voice coil impedance options are available across the range, enabling impedance matching to the mono amplifier's rated stable load for optimal power transfer efficiency without amplifier instability at the selected wiring configuration.


Car Mono Amplifiers and Multichannel Amplifiers


The power source that drives every speaker and subwoofer in an automobile audio system, beyond the output capacity of the factory or aftermarket head unit, is an amplifier. The cleanliness and power of the entire audio system under demanding listening conditions depend on the choice of amplifier class and channel configuration. With power ratings ranging from 500 watts RMS to 2,000 watts RMS at a 2-ohm load, VEVOR's car mono amplifier models are specialized subwoofer amplifiers featuring Class D topology. They offer the continuous low-frequency power output that subwoofer drivers need for precise bass reproduction at high volume levels without thermal shutdown.


With RMS power ratings of 50 to 150 watts per channel at 4 ohms, VEVOR's 4 channel car audio amplifier models power four full-range speakers concurrently with Class AB or Class D topology. This feature covers the entire range from high-output component speaker systems to modest factory speaker replacement applications. In systems that include both speaker and subwoofer upgrades, VEVOR's car multichannel amplifiers in 5 and 6 channel configurations combine full-range speaker channels with a dedicated subwoofer channel in a single chassis, eliminating the need for two separate amplifiers. This feature is a practical, space-saving solution for installers working within the limited amplifier mounting space in most standard passenger vehicle interiors.


CarPlay Screens and Wireless Car Stereos


CarPlay screens and wireless car stereos enable smartphone integration, navigation, and streaming audio connectivity in cars that are not possible with factory infotainment systems, either because the vehicle is older than modern connectivity standards or because the factory system lacks the wireless pairing and app integration that modern smartphone use patterns require. The CarPlay screen line from VEVOR includes flush-mount double-DIN replacement units that fit into the factory head unit opening for a fully integrated, OEM-quality appearance, as well as plug-and-play portable models that attach to the dashboard via suction or adhesive mounts, without requiring dashboard disassembly.


VEVOR's wireless car stereo models support both Apple CarPlay and Android Auto via wireless Bluetooth, eliminating the reliance on USB cables that can lead to dashboard clutter and cable wear from frequent daily connections and disconnections. From 7 inches on small single-DIN replacement units to 10.1 inches on wide-format double-DIN models with split-screen functionality for concurrent navigation map and media player displays, VEVOR's CarPlay lineup offers a variety of screen sizes. Under real-world driving conditions, VEVOR's premium wireless car stereo models with Bluetooth 5.0 and built-in Wi-Fi maintain stable wireless pairing connections across the entire range of smartphone positions within the vehicle cabin. These, without dropouts, plague older Bluetooth General CarPlay implementations.


Matching a Car Audio Setup to Your Build Goal


Once you know the component types, this table pairs a common build goal with the right combination and flags the one thing most likely to trip you up on each setup.


Build Goal Recommended Components What to Prioritize What to Watch For
Subtle bass in a compact car Single under-seat powered subwoofer Fit and slim depth over raw output Measure seat clearance first; slim boxes still need a few inches
Loud, high-output trunk system 12 inch enclosure plus a mono amplifier Amp RMS and subwoofer RMS matched at 1 to 2 ohm Upgrade power and ground wiring so voltage holds under load
Full speaker and subwoofer upgrade One multichannel amplifier for speakers and a sub Enough channels plus a dedicated sub channel A five-channel chassis saves space over two separate amps
Clean speaker upgrade without a sub 4 channel amplifier with full-range speakers Per-channel RMS close to the speaker rating Overpowering or underpowering both risk speaker damage
Smartphone connectivity only CarPlay screen or wireless stereo Portable versus flush-mount install effort Portable units avoid dash removal; double-DIN needs wiring

Installation Location Guide for Every Component Type


The typical situation in which a component is purchased without verifying that sufficient space, power wiring access, and signal routing channels are available at the intended installation location is avoided by planning the installation location before acquiring any automotive audio device. A power wire run from the battery, a ground connection to a nearby chassis bolt, and a signal input from the head unit's RCA output or a speaker-level input adapter are required for under-seat car subwoofers to mount beneath the front passenger or driver seat using the included low-profile mounting brackets. This feature is simple to install, and most skilled do-it-yourselfers can finish it in 2 to 3 hours.


The most time-consuming stage in a complete subwoofer installation is power wiring from the battery down the vehicle's chassis to the trunk for trunk-mount car audio subwoofers in sealed or ported enclosures. Using the included mounting hardware, amplifiers can be mounted to the trunk floor, side panels, or under seat locations. The choice of location is influenced by the amount of flat surface area that is available, the proximity of the amplifier to power and ground connection points, and the availability of sufficient ventilation clearance around the amplifier chassis for heat dissipation during prolonged high-output operation. CarPlay screen portable variants are the easiest car audio accessories to install for purchasers without DIY electrical skills, as they only require a 12V USB power connection from the car's USB port or 12V accessory socket, and a Bluetooth or USB connection to the factory audio system.


Selecting Car Audio Accessories by Power Rating and Features


A car audio component's power rating and integrated features affect how well it functions in its intended application and how easily it integrates with the vehicle's current electrical and audio infrastructure.


RMS vs. Peak and Impedance Matching


The single most crucial specification literacy skill for any car audio buyer is to understand the distinction between RMS and peak power ratings. This feature is because the peak power figures mentioned in marketing materials represent momentary maximum output rather than sustained continuous power delivery, which determines real-world loudness and audio quality under typical listening conditions. RMS power ratings and peak values are prominently displayed on all VEVOR car audio accessory product pages, enabling precise component comparisons and proper matching between amplifier RMS output and subwoofer or speaker RMS power-handling capabilities.


The second crucial specification pairing is impedance matching between the amplifier and the speaker or subwoofer load. This is because connecting a 4-ohm-rated amplifier output to a 2-ohm subwoofer wiring configuration draws twice the intended current from the amplifier output stage, which can lead to overheating and eventual failure in amplifiers not rated for stable 2-ohm operation. The dual-voice-coil subwoofer models in the range include wiring diagrams showing series and parallel connection options that achieve 2-ohm and 4-ohm final impedance from dual 4-ohm or dual 2-ohm coil configurations. This feature simplifies the impedance calculation that first-time installers find most confusing during a subwoofer system build. Additionally, VEVOR's mono amplifiers clearly state their minimum stable impedance on the product specification panel.


Built-In DSP, Bass Boost, and Wireless Connectivity


How well the system can be adjusted for optimal sound quality in the unique acoustic environment of a car cabin, and how easily it interfaces with source devices during regular use, are determined by the features built into car audio accessories. VEVOR's multichannel amplifiers feature built-in digital signal processing, including parametric equalization, time alignment, and crossover frequency control. These features enable the installer to account for high-frequency absorption, bass buildup, and acoustic reflections that vary with the interior volume, glass area, and seat material.


The roll-off in low-frequency output that happens with smaller subwoofer enclosure volumes in under-seat and compact trunk installations, where enclosure size is limited by available vehicle space, is compensated for by bass boost controls on VEVOR's mono amplifiers, which enable 0 to 12 dB of boost centered at a selectable frequency between 40 Hz and 80 Hz. One-touch wireless pairing memory automatically reconnects the driver's smart device to the vehicle upon vehicle startup, without requiring manual Bluetooth pairing each time the vehicle is entered, and is one of the wireless connectivity features on VEVOR's CarPlay screens and wireless car stereo models. This feature reduces the daily interaction overhead that wired and manual-pair wireless implementations impose on users during a typical commuting routine.


Best-Seller Comparison


These five picks follow the catalog, and they appear on the category page, so you can weigh real models side by side on size, power, amplification, and where each one fits best.


Product Type Driver Size Rated Power Amplifier Setup Install Location Standout Control / Extra Best For
Under-Seat Subwoofer 10 in, 440W Under-seat powered subwoofer 10 in 440 W peak Built-in amplifier Beneath a seat Remote control, blue ambient light Highest-powered under-seat box here; adds lighting and remote tuning
Under-Seat Subwoofer 10 in, 400W Under-seat powered subwoofer 10 in 400 W peak Built-in amplifier Beneath a seat High / low input, volume knob Simplest under-seat upgrade; wired input suits older factory radios
Monoblock Amplifier 3000W, Class D Mono subwoofer amplifier Not applicable 3,000 W RMS max Standalone (1 channel) Panel near battery and ground Remote level, low-pass filter, bass boost Only standalone amp here; drives a large aftermarket subwoofer
Subwoofer Bass Package 12 in, 245W Loaded sub and amp package 12 in 245 W RMS Built-in amplifier Trunk (slim enclosure) Loaded box plus wiring kit Most compact complete kit; slim trapezoid box fits tight trunks
Dual Bass Package 12 in, 490W Dual sub and amp package Dual 12 in 490 W RMS Separate amplifier Trunk enclosure Loaded box plus wiring kit Only dual-driver kit here; most low-end output of the five

Why Choose VEVOR Car Audio Accessories for Your Vehicle Upgrade?


Under seat car subwoofers, car audio subwoofers, car mono amplifiers, car multichannel amplifiers, wireless car stereos, and CarPlay screens are just a few of the many car audio accessories offered by VEVOR. All of these accessories are built with practical power ratings and useful features at competitive prices. VEVOR offers the ideal part for any car or audio application, whether you are improving a daily driver or creating a unique system. Explore the entire selection and place your order right now.


FAQs


What is the difference between a mono amplifier and a 4 channel car audio amplifier?


For optimal bass performance, a mono amplifier delivers all its power to a single subwoofer channel. A four-channel amplifier powers each full-range speaker. The most space-efficient option for a full-system upgrade that includes both speakers and a subwoofer is a multichannel amplifier that combines all features in a single chassis.


Can a VEVOR under seat car subwoofer fit beneath standard vehicle seats?


Yes, VEVOR's under-seat subwoofers fit under the majority of typical passenger vehicle, SUV, and truck front seats thanks to their shallow-mount driver designs, with mounting depths of 3 to 4 inches. To ensure the subwoofer's claimed height fits within your available under-seat space, measure the clearance beneath your car seat before making a purchase.


Does a wireless CarPlay screen require any wiring to install?


Only a 12V USB or accessory socket power connection and Bluetooth pairing to the built-in audio system are typically necessary for portable CarPlay screen variants. Signal wiring and dashboard disassembly are not required. Dashboard removal and installation of power, ground, and speaker wiring are necessary for flush-mount double-DIN CarPlay devices.


Can you recommend popular stereo accessories for my vehicle?


Popular upgrades include under-seat subwoofers for quick bass, mono amplifiers to drive them, and multichannel amplifiers for full-range speakers. For smartphone features, a CarPlay screen adds navigation and streaming. Match each one to your cabin space, power needs, and how much installation you want to take on.


What are the best car audio accessories for improving sound quality?


Sound quality improves most when an amplifier's RMS output matches your speakers or subwoofer and a dedicated car mono amplifier handles the bass. Amplifiers with built-in DSP, bass boost, and crossover controls let you tune output to your cabin, which reduces distortion at higher volume.


What should I consider when buying audio accessories for my car?


Weigh four things: component type, RMS power rating, impedance compatibility, and installation space. Confirm your amplifier stays stable at your subwoofer's ohm load, and measure the mounting area first. For connectivity, decide between a portable screen and a flush-mount unit that needs dashboard work.


What are the best car stereo systems available online?


The strongest options are wireless units supporting Apple CarPlay and Android Auto, sold as flush-mount double-DIN replacements or portable add-ons. Browse the car stereo radio range and choose a screen size and mounting style that suits your dashboard and how much wiring you want to do.


What are the best car amplifiers for high-quality sound?


Mono amplifiers from 400 to 3,000 watts RMS suit subwoofers, while 2, 4, and 5 channel models drive full-range speakers. Class D designs run efficiently for bass. Choose an amplifier rated stable at your load's impedance so output stays clean and the unit runs reliably.


How do I choose the right car audio components for my vehicle?


Start with your goal: deeper bass, louder speakers, or smartphone connectivity. Measure available space, then match power and impedance across components. A single multichannel amplifier can run speakers and a subwoofer together, saving room. Compare the full car audio range before deciding.


What features should I look for in a high-quality car speaker system?


Match speaker power handling to your amplifier's RMS output, confirm the impedance your amp supports, and favor amplifiers with DSP, crossover control, and bass boost. These let you balance speakers against a subwoofer and tune the system to your cabin's acoustics for cleaner sound.


Tips & Inspiration