Customer Reviews for VEVOR Welding Table 36'' x 24'', 600lbs Load Capacity Steel Welding Workbench Table on Wheels, Portable Work Bench with Double-layer Storage Board, 5/8-inch Fixture Holes, 11 Hooks

Decent quality for home shop stuff. I drilled holes in the legs and put the supplied shelf clear at the bottom then made another to put a little higher than where it was set up to be. Put my welder on the bottom, a vise on the corner and some clamps on the other end. The top shelf has some misc tools and catches all the debris from working on the top as well as protecting the welder. Works good!

Bought this for my Stahls Fusion IQ Heat Press that's really heavy. I needed something that would support it and not buckle under the weight. This seems to work well and is a perfect fit. I know that's not its intended use but it seemed like the best option I could find for the price. Only downside was the amount of oil that was on it for shipping. There was quite a bit I had to wipe down during assembly, but not the end of the world. So if you have a heavy heat press for apparel or Kydex, this may be a good option.

Seems fine. I wanted a cart, not a table. It's like welding on a cart, minor wobbles. Thickness is 1/8.

Bought this for our son for Christmas. He is pleased with it and has already used it. He like that it was on casters so he can move it around easily.

I decided to add metal working to my home shop. Purchased this cart based on the reviews and price. Bang for buck it is great. The castors are pretty nice with option to lock all four in place. It's a light duty (10 gauge top) portable work table. If that's what you are looking for then you will be very happy with it.

The table is heavier and sturdier than I thought and should be ok for the occasional welding I do. The only problem is the packaging is not sufficient to prevent damage during shipment. The table arrived with one of the casters broken and the bottom shelf dented where the caster was located in the box. I called customer service, and they sent me a new caster within a few days. The dent was minor, so I let it pass.

Strong steel construction. I added washers under the bolt heads, although it is probably fine without them. The holes in the table are slightly undersize (0.622"), probably because they were punched (not drilled) with the 3 mm steel plate hot. I had to turn down the shanks slightly on my clamps to fit in. (That is not a big deal, but I am not about to try to drill out all of the table holes.) The lower shelf is really useful and the casters roll nicely.

Es demasiado alta, endeble y se bambolea. Las mesas que me hago yo para mí, son de 5mm. Está es de 2.5 mm. El sobre de la mesa le sobran agujeros y es muy delgado.

Table was a great deal for the price. They should include some washers, especially for the handle. Lock washers would be a great addition as well. Arrived in rough shape, no dents and not rust as the table top was wrapped in oil wax paper. That is crucial as it is bare exposed metal. All 4 legs had scratches where the casters attached probably due to poor packaging. There was also 1 scratch on the underneath of he middle tray. If they included washers and beefed up the packaging, this would be a solid 5 star all day.

One of the long oblong hold down holes was cut crooked. But its usable. Gave a 5 star if it was perfect.