Customer Reviews for VEVOR Swing Set Brackets, Heavy-Duty A-frame Set Hardware, with 2 A-Frame Swing Brackets & 2 Seats & 4 Hangers, for Playground Backyard Park Equipment Mounting Parts Outdoor, Hardware Included, Green

Very sturdy but burs inside top of bracket required grinding down to slide onto 4x6.

Great edition to our backyard!

Brackets are heavy duty , but they give you 1/4 inch lag bolts that are 1 inch long and are to small. Brackets have 3/8 inch holes. They should have supplied 3/8 inch lag bolts . Had to purchase 32 3/8 inch lag bolts to replace the small 1/4 inch ones that were supplied with them .

Good quality brackets the screws that hold the legs are not substantial enough, had to replace with longer screws but beyond that good quality

4”x6” lumber DOES NOT exist in Ontario, which has made what should be a simple swing set build into a super annoying drawn out project that I still haven’t completed weeks after receiving the bracket. Good luck.

Brackets don't fit standard lumber... 4x4's for the legs are loose and the 4x6 for the horizontal beam is too tight to fit in the bracket.

Brackets are pretty decent. The 4x6 part fits perfectly the 4x4 side for the legs are sloppy. The screws sent to assembly everything with are way too small not happy with them at all. Had to go to the hardware store to buy replacements as the ones supplied and way undersized and dangerous.

After dealing with customer support multiple times, they would not send me thru bolts that are available with the same brackets with different SKU. The screws that come with this set are approximately one and a half inches long and do not provide structural support for the legs. The swing set wobbles back-and-forth very easily, and the screws have a tendency to strip due to back-and-forth swinging, which also has some side to side movement. Over one week, it became more and more unstable. Vector was unwilling to accommodate when I asked for the thru bolts that come with these brackets in different packages — the same exact brackets. I have built tree houses for my children, so I am not new to building structures like these. Despite sending videos of the wobbling, Vevor support claimed that the installation was improper due to sizing of the legs, looseness of the bolts, among other excuses blaming the installation process. I ended up having to purchase my own thru bolts and the swing set worked perfectly, but that amount of hardware cost about as much as the brackets did. Here is an SKU that has the appropriate thru bolts: QQZJ2PCSTG00H8ZGAV0. Good luck.

This product is ok, the bracket it’s self is relatively solid, the swinging hardware is very nice bearing operated and seems solid. My largest complaint is the space left in the bracket after installing the dimensional lumber as well as the cheap mounting hardware (self tapping bolts provided with bracket). There is so much play especially in the 4x4 slots I had to shim and purchase new self tapping bolts in order to tighten up the movement in the swing set. The 4x6 beam across the top I had to cut to size out of a 6x6 otherwise I would imagine I would have had the same issue when mounting that. Another small gripe is the bolts provided for the swing hangars, most other sets I’ve seen have a bolt go through a hole with a nut and washer on the top side vs the self tapping bolts provided. This can always be added after but either sell the bracket cheaper and have user purchase their own hardware to mount or provide the upgraded hardware from the start. Other than that I would recommend this product if you’re ok with some DIY adjusting.