Customer Reviews for VEVOR Stainless Steel Prep Table, 61 x 45.7 x 91.4 cm, 272 kg Load Capacity Heavy Duty Metal Worktable with Adjustable Undershelf & Feet, Commercial Workstation for Kitchen Restaurant Garage Backyard

Good product good quality

Prior to purchase, I had about 24” of useable counter space to prep with for meals. With this, I now have 55”. I took my kitchen aid off a 13” counter and stored below (with other items that allow for more frequent and ease of use”, and now have the additional 18”. I am now making meals at least 5 days a week. This is a game changer. Assembly was fairly easy (use a leveler), measure twice, “cut” once.

Me encantó y sirvió muy bien para mi negocio

I have the 24x18x36 model, the legs are 38mm in diameter the wall thickness is 1mm. The legs and shelf are adjustable. I wouldn't put 600 lbs on it but it is sturdy. It came with a heavy white plastic film protecting the finish on the shelves it's hard to pull off, it comes off in one piece. Or you can leave it on. This a good table that will be used for years to come.

Very nicely packaged. Arrived in perfect condition. Easy to assemble due to great design. Very sturdy and looks beautiful in our kitchen. Bought it as a base for our citrus press. Added a plastic cutting board with juice groove under the press to spread out the force of downward pressure and catch any drips or splashes.

Have yet to put it together, waiting for the space to be finished, Howe, have looked at it and it seems to be of quality.

End product is nice, but putting it together is non-trivial and took us literally hours. First we had to peel off the sticky tape protecting all the stainless surfaces; this was hard work and required strength, manual dexterity, and extreme patience. Then, it was difficult--very difficult--to get the feet holders driven into the lower legs (so that the feet could then be screwed in); thankfully, we had a rubber hammer to complete driving them, but not everyone will. Lastly, instructions are sparse and in the WRONG ORDER. Do not put the middle shelf on before driving in the feet! The act of driving in the feet shook the middle shelf loose, and it had to be resituated--duh! I've put together many pieces of furniture over the years, and I rate this one as one of the very most challenging. Lastly, the top would not go on because one leg would not fit all the way up into its cradle. My husband was able to use a dremel to debut the edges of the metal so it finally went in; this is beyond the ability of most people.

Good table worked as needed

Very sturdy and good adjustability for unlevel floors. Protective tape was pretty hard to remove, but you only have to do it once and it did arrive in perfect condition, so I guess it's OK. Seems nice so far, and well designed. Hardware and provided tools were decent quality, too. I doubt you could get a better table for less elsewhere.

Colis reçu hier en bonne état, la table à l'aire de bonne facture maintenant à voir dans le temps ca résistance à l'usage… Pour le montage les fixation mon l'aire un peu légère car j'espère que le futur four électrique de 30 kilos qui seras poser dessus pourra le supporter dans le temps. Pour résumer je suis mitiger @ voire.