Customer Reviews for VEVOR Stainless Steel Prep Table, 610 x 457 x 864 mm, Heavy Duty Metal Worktable with 3 Adjustable Height Levels, Commercial Workstation for Kitchen Garage Restaurant Backyard

This table is well crafted but oddly short at 26” high. Not suitable for an Ooni gas pizza oven. Too much bending over. Tried to source leg extensions through the Vevor website. No luck.

Ich kaufe ein Produkt frei Haus und bekomme dann von DHL eine Rechnung für die Verzollung zu ca.25% vom Kaufpreis. Das geht nicht!

The legs did not have the pre-drilled mounting holes in the proper location and were hard to line the bolt threads up correctly. The threaded support feet on each leg were cheaply made and had loose threads.

The table itself isn't too bad and is as stated. Don't quite understand why it's 38" high which is above normal for most anything. Of course I knew that when ordering. The biggest problem is the sticky vinyl covering they use to protect top and shelf. It is way to sticky and wraps under the top and shelf. I took about 3-4 times longer to remove the covering than it did to assemble the unit!! Surely there is a better less hassle way of doing this.. Gerry

Vevor advertises this as a work table, suitable, among other things, for food prep. The legs are only 26 inches high, making it very hard to chop vegetables unless you are size compromised. The proper classification for this is an equipment stand, which restaurants use for placing mixers, coffee makers, soda pop dispensers, etc. An actual work table will usually have a height in the area of 34 inches.

RAZOR sharp edges!!! Super sturdy but expect to sand down all the edges. They literally sliced thru the sand paper.

This arrived earlier than predicted and was fairly easy to put together. HOWEVER, the holes for the screws and the way everything lined up, especially for the bottom shelf did not line up evenly. There are only three levels provided as options where you can put the bottom shelf. I wanted to put the bottom shelf on the very bottom, closest to the floor. The only way for me to get the bottom shelf screwed into place was the first option, the closest to the top. I didn't have any other choice because the screws would not go in or line up properly at any other level. I have an item that is over 400 lbs that will have to sit on the very top. It states it can hold over 900 lbs! Fingers crossed it can hold and I get my way with at least one thing when it comes to this table.

J’attendais une table de 95,5 cm de haut et j’ai reçu une table de 100,6 cm de haut ! Ce qui dépasse la hauteur de mes autres équipements ! La qualité de l’inox reste à tester à l’extérieur. À suivre car épaisseur faible

The table generally looks and feels sturdy but there are a couple issues: 1. After it was fully assembled the height of the table is only 24 inches but Vevor shows it as 26 inches. The misleading height on the website should be updated. 2. While the protective film is appreciated it took 1-2 hours to peel if off (one top and one shelf) which is way too long for any customer. The assembly took much less time! It is unreasonable to ask a customer to spend that much time peeling off the film. I have deducted 2 stars for both issues but mainly because of the film.

Want to get taller legs. The legs are too short.