Customer Reviews for VEVOR Solid MIG Welding Wire, ER70S-6 0.8mm 4.5kg, Low Spatter Mild Steel Welding Wire with High Deoxidizers for All-Position Gas Shielded Welding

’ve been MIG welding for over 50 years, from shop fabrication to field repairs, and I’ve run more spools of wire than I can count. I’m not easily impressed by marketing claims. What matters to me is how the wire feeds, how the arc behaves, and what the finished weld looks like when you chip, brush, and inspect it. I ran this VEVOR 0.035" ER70S-6 with a standard 75/25 Argon-CO₂ mix, and I was satisfied with the results. First off, the arc characteristics were smooth and stable, which is what I expect with 75/25. This wire lit easily and maintained a steady arc without excessive popping or wandering. On mild carbon steel, it laid down a clean, consistent bead. The higher manganese and silicon content did their job — I welded over some lightly scaled and slightly oily material (nothing extreme), and the welds stayed solid with good tie-in and minimal porosity. Wire feeding is a big deal in a busy shop. A lot of frustration in MIG welding comes from inconsistent feed or bird-nesting. This spool fed smoothly and consistently through my machine. No tangles, no hiccups, and very little spatter. Less spatter means less grinding, and after decades of welding, I appreciate anything that reduces cleanup time. I ran it in multiple positions — flat, vertical, and some out-of-position work — and it behaved well. With proper settings, it held the puddle nicely and didn’t sag or get overly fluid. For automotive repair, equipment maintenance, and general fabrication, it performs the way a good ER70S-6 wire should. Using 75/25 shielding gas, I saw low spatter and clean bead appearance. I’ve run straight CO₂ plenty of times in my life, but 75/25 gives you a smoother arc and better overall finish, and this wire pairs well with that mix. The welds had good penetration and a solid, uniform profile. The spool itself feels sturdy and holds up fine in storage. The wire has the tensile strength you’d expect from ER70S-6, and I didn’t see any cracking or brittleness in test pieces after cooli

Good wire,, almost no splatter welds great Another good product from Vevor

Great product smooth feeding

As Advertised, This will be used with a laser welding rig.

I’ve only ran it on 220 volts. Runs gas(solid wire) mig very well. Doesn’t like the flux cored wire but will run it.

Bom produto e ótimo preço/qualidade

welded old rusted exhaust ...did great ..will be buying more

Works as it should

Alles bestens, gerne wieder!

Good quality, fit on my welder