Customer Reviews for VEVOR Solid MIG Welding Wire, ER70S-6 0.6mm 4.5kg, Low Spatter Mild Steel Welding Wire with High Deoxidizers for All-Position Gas Shielded Welding

This is great flux core wire, I have had no problems with this. Welds great, price is really good

AAAAAAA++++

Vevor is known brand for the quality items. You can trust this brand. This welding wire is not exception. Fits in my welder and feeds smoothly with no issue. Fills like durable both spool & wire. Did some test welding and it hold very well producing good weld bead. Price is OK.

test concluant excellent produit et surtout prix

Great Stainless MIG Wire for the Price — Smooth Feed and Clean Welds I used the VEVOR Solid MIG Welding Wire ER308L 0.03‑inch 2‑lb for a few small stainless projects (304 tubing and brackets), and it performed better than expected for the price point. The wire feeds very smoothly with no bird-nesting or tangling, which is always a concern with budget wire. Arc stability was good using 75/25 gas, and spatter was minimal. The weld bead came out clean with good wet-out and required very little post-cleanup. Being ER308L, it’s ideal for 304/304L stainless applications, and the low-carbon formulation helps with corrosion resistance after welding — exactly what you want for stainless work. The 2-lb spool is also convenient for hobby use or occasional jobs without committing to a large roll. Pros: Smooth, consistent feeding Stable arc and low spatter Good bead appearance Excellent value for stainless wire Perfect size spool for small projects Cons: Requires shielding gas (not flux-core) Spool is small if you do high-volume welding Overall, this is a great budget-friendly stainless MIG wire that performs surprisingly well. I would definitely buy it again for light fabrication, repairs, or DIY stainless projects.

I'm a fan of Vevor. I think they make good reliable products at a fair price. This wire has proven to be no exception. The spool arrived in good shape, without any shipping damage or any obvious impacts. The spool fit perfectly, and it feeds great in my Millermatic 210. With standard gas, the weld quality is what I want and expect. Splatter is minimal, if any. The pool and bead flow are smooth and consistent. I don't feel any need to clean, even when building up beastly fillet layers. I'm not a pro, but it seems everything in my life needs welding! I can't justify the cost of something like Lincoln wire, so I don't know how that compares. I can say that I've bought some lousy wire in the past. This wire is not like that at all. It does what I expect it to, and to me is a reliable go-to that I would be comfortable using anywhere.

Works great in my Hobart welder. I’m a beginner and this wire is pretty easy to work with for my skill level. Welds have been strong and held up under heavy use.

Rychle dodanie

’ve been MIG welding for over 50 years, from shop fabrication to field repairs, and I’ve run more spools of wire than I can count. I’m not easily impressed by marketing claims. What matters to me is how the wire feeds, how the arc behaves, and what the finished weld looks like when you chip, brush, and inspect it. I ran this VEVOR 0.035" ER70S-6 with a standard 75/25 Argon-CO₂ mix, and I was satisfied with the results. First off, the arc characteristics were smooth and stable, which is what I expect with 75/25. This wire lit easily and maintained a steady arc without excessive popping or wandering. On mild carbon steel, it laid down a clean, consistent bead. The higher manganese and silicon content did their job — I welded over some lightly scaled and slightly oily material (nothing extreme), and the welds stayed solid with good tie-in and minimal porosity. Wire feeding is a big deal in a busy shop. A lot of frustration in MIG welding comes from inconsistent feed or bird-nesting. This spool fed smoothly and consistently through my machine. No tangles, no hiccups, and very little spatter. Less spatter means less grinding, and after decades of welding, I appreciate anything that reduces cleanup time. I ran it in multiple positions — flat, vertical, and some out-of-position work — and it behaved well. With proper settings, it held the puddle nicely and didn’t sag or get overly fluid. For automotive repair, equipment maintenance, and general fabrication, it performs the way a good ER70S-6 wire should. Using 75/25 shielding gas, I saw low spatter and clean bead appearance. I’ve run straight CO₂ plenty of times in my life, but 75/25 gives you a smoother arc and better overall finish, and this wire pairs well with that mix. The welds had good penetration and a solid, uniform profile. The spool itself feels sturdy and holds up fine in storage. The wire has the tensile strength you’d expect from ER70S-6, and I didn’t see any cracking or brittleness in test pieces after cooli

Great MiG wire for great deal. Very happy with this product. Easy to use as any other wire spools- fit just as other spoils of small weight - size in our mig welder. Great value come in at about 1/2 price to local plus we aren't driving 30miles to pick it up 👍. Very happy with the performance when welding as well ! Will 100% order again. Good on my save list !