Customer Reviews for VEVOR Single Horn Anvil, 30kg Cast Steel Anvil, High Hardness Rugged Round Horn Anvil Blacksmith, Large Countertop and Stable Base, with Round and Square Hole, Metalsmith Tool for Bending and Shaping

The overall design is pretty good, i do like the wide face and the hardy hole looks good, but what is with the rusty bottom, isn't that supposed to be painted as well? And i find a hammer made some small dents, not to bad, just happy to have an anvil

Awesome for the price!Please note, you arent paying for a high quality anvil, Like...at all.. BUT it is very good for the price and gets the job done. Has a good ring to it and decent recoil. Not the best, but good. The BLUE color is butt ugly, so i ground that down and oiled it. It is also mold formed steel. So there is ALOT of flaws like gouges in the metal. Nothing a welder and some grinding couldnt fix. There was noticeable welds that were pre done from factory. I just added to it to smooth out. Top surface was smooth. Just rounded the edges and cleaned up he hardy hole. Alot of burrs and rough edges. Over all would buy another if i needed it!

I have seen worse and better quality anvils.1- There was some flashing I had to cut off on the underside of the horn, no surprise, I had planed to clean off the epoxy coating and slightly reshape the horn anyway. No big deal.2-Upon cutting and flap disking the chunk off I realized the color of the sparks determined it is cast with high carbon steel, using the spark test method.2-Be careful of the epoxy coating, as I'm sure it is very toxic, wear a respirator if grinding.3-There was some fine cast pitting on the horn mainly surface, I'm sure the coatings purpose is to cover these flaws. no big deal. see pic.4-The face is flawless and the hardy hole is square and center.5-the dimensions shown in the manufactures description pictures are way off, see pic.6-as for the hardness of the face, time will tell, if used correctly it should be O.K.not too bad overall for beginners utilizing for small projects, you get what you pay for. Made in China....of course.conclusion: WE NEED TO BRING BACK ALL MANUFACTURING TO NORTH AMERICA,

Je suis un débutant et c'est parfait pour forger. Le dessus a fini par être bosselé, mais ça m'empêche pas de m'amuser à forger. Pour un débutant c'est super !

Works great a little damage when received

Anvil came in great looks good and I'm very happy with it the hammer arrived with a cracked handle but I didn't even know I was getting the hammer so not a big deal to me,.

Did the job. Used it to hammer flat and put edges back in pressed metal items. Cheaper and handier than buying a thick block of solid bar.

I like this small anvil. It does what I need as I do not do any heavy anvil work

Solide verarbeitet, gut gewichtet für kleinere Arbeiten - wer Schmuck, kleine Metallteile oder feine Schmiedearbeiten macht, ist hier genau richtig. Wer allerdings plant grob draufzuhauen und größere Stücke zu bearbeiten, braucht schlicht mehr Masse unter dem Hammer. 10kg sind was sie sind. Erwartungen anpassen, dann gibt es nichts zu meckern....

It came with alittle surface rust which isn't a huge deal and it has a few surface imperfections but it's not bad