Customer Reviews for VEVOR Pocket Hole Jig Kit, 12.7 to 38.1 mm Adjustable, Jig Pocket Hole System with Toolcase, C-Clamp, Step Drill, Hex Wrench, Drill Stop Ring, Square Drive Bit, Reinforced Metal Frame, for Woodworking

First of all, the drill stop ring was too tight for the drill bit, and required widening. Next, when I setup to do pocket holes, the holes in the 3-hole guide were also tight, causing the drill bit to dull, but using it for seconds in each, made the holes a bit wider. But because the bit was now dull, I ended up having to replace the bit with another new bit I had. But the machine makes a terrible squeaking sound, as per video. (My new bit is what's being used in the video) All in all, it was good for the buck, but improvisation was needed.

The jig does not hold position tightly enough. Even when screwing it into place very tight the drilling process would often move the jig leading to me drilling into the metal bottom plate a little ways.

Too much plastic and very cheaply made. Will not last too long if used repeatedly. The sizes it grips is limited.

Funkar bra för ett fåtal hål, men styrningarna för klena glappar efter ca 100 hål. Detta gör att efter ett tag blir hålen lite olika vinklar då alumimiummaterialet äte upp av borren Lätt att ställa in och skapade för material upp till 40mm.

Buenos acabados. Pero es cierto que al uso, tiene un desgaste prematuro, el casquillo debería de ser mas largo y de un material mas resistente. Tambien debería de haber piezas de repuesto para pedirlas individualmente. Lastima, por muy poco más de control de calidad, hubiera sido un producto de 10.

Because it was metal, I thought it would be more durable than my Kreg pocket hole cutter but it isn't. I feel it isn't as rigid as the Kreg. It works fine and for the price it isn't bad but I think I prefer my Kreg over it.

One of the drill bits broke after about 20 holes. The guides allow the drill to kick to the side and then cut into the fixture. Not great, but does get the job done.

The tool has a great price but is not built to last. Ideal for someone needing to make a few dozen pocket holes, but does not stand up to repeated long term use. Bushings and bits quickly wore down.

The pocket hole jig bushings fall out every time you remove the drill bit. Other than that the pocket hole jig is what I expected. Much cheaper than the kreg jig but you generate you pay for.

Instructions are lacking big time, so newbies like me will have problems. Should not have to watch videos to figure it out.