Customer Reviews for VEVOR Pipe Stand, 2500LBS Heavy Duty Pipe Stands, 27.2"-52" Height Adjustable V Head Pipe Stand, 45# Steel Folding Stand for 1/2-12 inches Pipes

Pas trop mal mais les finitions pourraient être améliorées c’est un peu crade, la peinture était esquintée aussi et le système pour bloquer la rotation est à revoir, c’est une vis qui appuie sur le filetage a l’intérieur de la servante pour l’empêché de tourner ce qui à long terme paraît moyen pour le filetage, autrement c’est du solide ça vaut plutôt le coup pour le prix

GOOD SOLID UNIT. GOOD VALUE AT THIS PRICE

Solid design, exactly what i need it for

works very well.

Worked good except for top screw in tightener stripped out first thing. Cant hold it one place now.

Well constructed, heavy duty. Only flaw I've encountered is the placement of the lock down bolt for the threaded shaft. When dialing in the stand to height, the bolt is in the way of the adjustment handle when trying to lock it in place. Thinking that lock down bolt should be about an inch lower.

I use these to build feed augers. They are 23 feet long and 1400 lbs. These work amazingly well to be able to roll them to weld.

The stands are OK but the rollers were locked up. I had to disassemble the rollers and hone the tube out to seat the bearings properly. The bearings had been pressed in to tight and would not roll.

Wery rough surface on the rolls. The bearings does not spin. A bit disappointed.

Took a long time to deliver courier stuffed up Bottom bolt stripped had to rethread hole and bigger bolt ! Otherwise is Ok