Customer Reviews for VEVOR Pallet Forks, 907 kg Tractor Bucket Forks, 1490 mm Total Length Clamp on Pallet Forks with Adjustable Stabilizer bar, Heavy Duty Pallet Forks for Tractor Attachments, Skid Steer, Loader Bucket

Overall this is a well built tool with the exception of the stabilizer bar which broke the very first time the se forks were used . I took these forks to a welding shop and had them weld a permanent stabilizer bar and now it works great would have given 5 stars were it not for the bar...factory might take a second look at this it is made from too light of material

These forks worked great, lifted very heavy logs with no problem. But the Stabilizer Bar cracked the first day. The welds between the bar and the ends (that slide on the fork) werent strong enough. I'm searching for a heavy duty bar now. But the forks are very heavy duty, impressive for the price. I do recommend using a rubber blow hammer to get the screw bolts really tight, and keep it with you b/c they do get loose and/or you will need to bang the fork straight periodically. But for occasional use, they are great

My husband was impressed, but there was a clamp missing and package was damaged in shipping. Did not contact seller as he found another clamp that would work.

Produit conforme à prix compétitif apte à rendre les services pour lesquels il est conçu. A voir dans le temps .... Une étoile en moins car le cadre & les fourches sont livrés indépendamment, sans que l'on en soit averti lors de la commande, ce qui implique deux livraisons séparées, en faisant réclamation parce qu'il manque un colis !

They work pretty well but can slip if they are not really well attached. Need to use the cross bar or they can easily fold in or out. Limited by the lifting ability of your tractor and bucket.

Using on my my TYM 234 bucket. They obviously will out preform my tractors lift capacity. Definitely recommend these. Only down side as stated by others they can and will move around on you no matter how tight you get them on the bucket. Once under load no issues at all. Make sure to tighten using a wrench on the nut not the handle.

I've used them to pickup railroad ties and when I started going under the ties they turned sideways . They were sliding on the yellow plates. You have to really tighten them to your tractor bucket to keep them in place. The crossbar bolt also broke on the forst usage. Thank you for suppling a spare. Overall strength is good. They are worth the money just tighten them extremely tight so they don't shift.

Bon rapport qualité prix mais le systeme de fixation à vis n'est pas au point il faut modifier les fixations pour s'adapter correctement au chargeur....

Very impressive for the price work well and seems really strong I used the fork at the warehouse to move trusses and roofing materials. I also use the forks to remove a large section of roof that collapsed moving it from the ground into a large dumpster

Seem to be sturdy enough. We're only picking up things limited to our little tractors capacity so these will be plenty strong enough. Main concern is no weep holes. Water intrudes then can't get out. Will be a problem in winter. I'll drill some holes to allow the water to escape and hopefully keep them from freezing and swelling or busting. Second problem is how the chain slots are oriented. If you use a chain, you can't use a 2x4 in the upright slot and on the bottom, they cause the chain to drag along the ground. Which will use you from leveling the forks if on a hard or concrete surface. Overall though they are sturdy and easy enough to put on your bucket. No instructions are included so just use trial and error until you're happy with how you decided to install them!