Customer Reviews for VEVOR Pallet Forks, 907 kg Clamp on Pallet Forks, 1490 mm Total Length Heavy Duty Pallet Forks with Adjustable Stabilizer bar, Tractor Bucket Forks for Tractor Attachments, Skid Steer, Loader Bucket

They are hard to tighten on the bucket. Also they will loosen and turn or fall of the bucket. Needs a more stable way to attach to the bucket.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

Does what I need it to do. The design isn’t great if you store your tractor outside because they hold water. Not sure how long they will last.

Expect max. Lift weight to be reduced. Don’t get the spreader bar.

I like these forks, as they are strong and mostly well built. I've used them with my tractor to move quite a bit around my shop... all of it under 1000 pounds. They've not given me any issues. However, the mechinism that is used to clamp them to the forks could use some revision! It's difficult to tighten the clamps down, as the handles will hit into each other when rotated. This could have been easily fixed by making one of the bolts slightly longer than the other. then they would clamp down at different heights. Also, since they are so short it is best to have a \"cheater bar\" handy. I used a 9\" piece of pipe to add a little extra torque to the bolts. Other than that, these are a great addition to any tractor!

sa fait le travaille

I have a 2006 Kubota L48, the forks fit the bucket well, and seem like they have good welds. Lifted a pallet with five bails of hay and seemed like no problem. Should be a life changing addition to the tractor and what i can accomplish on the five acres.

Overall this is a well built tool with the exception of the stabilizer bar which broke the very first time the se forks were used . I took these forks to a welding shop and had them weld a permanent stabilizer bar and now it works great would have given 5 stars were it not for the bar...factory might take a second look at this it is made from too light of material

These forks worked great, lifted very heavy logs with no problem. But the Stabilizer Bar cracked the first day. The welds between the bar and the ends (that slide on the fork) werent strong enough. I'm searching for a heavy duty bar now. But the forks are very heavy duty, impressive for the price. I do recommend using a rubber blow hammer to get the screw bolts really tight, and keep it with you b/c they do get loose and/or you will need to bang the fork straight periodically. But for occasional use, they are great

My husband was impressed, but there was a clamp missing and package was damaged in shipping. Did not contact seller as he found another clamp that would work.