Customer Reviews for VEVOR Pallet Forks, 907 kg Clamp on Pallet Forks, 1490 mm Total Length Heavy Duty Pallet Forks with Adjustable Stabilizer bar, Tractor Bucket Forks for Tractor Attachments, Skid Steer, Loader Bucket

I am really impressed by how stout these are, I've been using them on an IH 2000 loader on a 656 utility tractor and have been completely impressed with the forks themselves as due to the fact that the visibility is horrible I've run them into the ground and other objects and haven't hurt them one bit. I tore a helluva gouge across probably 20' of the barnyard pushing a pile of scrap lumber and light brush, didn't hurt the forks one bit! One thing I will say is that the adjustable cross bar is very light duty, it does it's intended job but I plan to use it as a pattern and make a beefier version or considering how simply it would be I'll probably just make a couple fixed width bars, i figure that a 36" and a 24" would cover most needs. I'm completely satisfied with these forks, the build quality is solid, granted some of the welds don't look very nice but they are strong. I would buy them again.

Much better than I thought they would be, I use these on a backhoe to move cars around and have held up well.

I bought the HC60-4000T (4000 lbs) Received quickly in 4 business days. High quality, very strong. I'm very happy ! No Canadian taxes, Free shipping. 5* for sure !

These are very nice forks. They fit and work great on my loader tractor.

These pallet forks are the lowest price I have seen and are even significantly less than secondhand pallet forks so they're ideal for occasional use. It's a basic piece of kit and providing the welds are checked and okay there's little to go wrong. My only niggle is the pins for attaching the lower link arms. These would just wiggle about and would risk causing problems but its a simple job to replace them with pins bolted into the pallet fork frame.

Completely satisfied. I use the 3-point mounted pallet forks for tons of stuff around the property and even to unload lawn and garden tractors from the bed of my truck. You can't quite see the forks in this image but they are under the ramps which rest on the truck bed. Roll the tractor seamlessly from the truck bed onto the ramps that are secured to the pallet forks. Then just raise the hitch forks up and go. I also use them to take heavy trash bins to the curb and with a carrier bin to move lots of stuff around with the forks. Highly recommend especially at this price.

This is a great and versatile product we use on our little farm nearly every day. We moved hay bales, bee hives, logs for the mill, toolboxes, and pallets full of saplings without any issues. It's quick to adjust the width and simple to install and remove. We're very grateful to have this tool.

In all fairness, I reluctantly ordered these fold down 3-point forks to move pallets of lumber and set average logs on the mill. Loader forks were out of my price range at this time. I never intended to use them for extreme lifting, but of course, that's what I needed when they arrived, (two packages, a week apart) Coming off a two week bad spell with a tweaked back, I needed to get a large log onto the mill. Advertising listed them at 2200 lb rated. I put them on the tractor (1986 Ford 38HP) and set them down next to this particular log, then rolled the log onto the forks and shortened the top link to keep it in place.When I lifted the 3-pt the tractor grunted some but it lifted, so I backed up to the mill and set it on the rails... Done, every body can relax again. Turns out the my Log Weight Pro app says that log weighed 2780 lbs! [25" x 13' 8" Eastern Hemlock... look it up] I DO NOT recommend anyone else over load any equipment, and had I looked up the weight beforehand I would not have challenged fate. No cracks, bends, or any signs of my abuse so this one gets 5 stars. Sidenote: I will be adding 6" chain locks to keep them upright when not in use. [Danger] I'll be recoating them with a quality bed liner in spring. But nobody will cut the parts out (so you can weld them) for the price. Fold up forks, carry-all, round bales, slabs, log loader on a ground level sawmill.

Preis Leistung passt. Bin zufrieden mit der Ware.

These work perfectly for what I needed. Handling odd pallets with less than 300 lbs. For the price they cant be beat.