Customer Reviews for VEVOR Motorcycle Wheel Chock, 816.5 kg Capacity Wheel Cradle Holder, Heavy-duty Steel Motorcycle Front Wheel Stand with 3 Adjustable Holes, For 381-533.4 mm Off-Road Motorcycles, Standard Motorcycles

Works well. It accommodates different size tires, a plus. Make sure you also secure the bike down with straps. I gave it 4 because my tire is small and has a lot of wiggle room. 5 for sturdiness.

Parfait pour ma moto !

I attached it to a lift table . The is level and secure .

I had to make two alterations to make this usable. I didn’t want to bolt it to the floor so I fixed a 600 mm long piece of 40 x 40 steel angle to the front. Some rubber strips under this stopped it sliding around and makes the whole thing very stable. With the bike in the stand, the shiny plastic coating on the base allows the tyre to ‘squirm’ sideways a lot and the bike is not held upright with any security at all. I overcame this by bolting two short 50x40 timber sections to the base in close contact to either side of the tyre wall. The tyre can’t move sideways and the bike stays vertical. Both these mods could be done by Vevor!

Round head bolts not ideal for the thickness of the metal, the square hole turned round on hand tightening, instead should have a standard bolt head so can be held in place with a tool.

I’m not really impressed. It fits okay, but is really wide and doesn’t hold very well. The plate under the tire is smooth, so the tire slips sideways and lets the bike tip to the side. Definitely don’t trust it without the kickstand or some straps.

I put my tent garage up and was very happy. I also made a stone foundation to anchor it well. After one week it was a windy weekend and the complete tent went to pieces. Too bad because the idea is brilliant.

Description says fit wheels up to 21 inches, but it doesn't. I tried all of the different settings on the wheel chock but the bike keeps wanting to fall.

Came already returned missing bolts