Customer Reviews for VEVOR Mobile Base, 680.3 kg Capacity, Adjustable from 508 x 622.3mm to 711 x 850mm, Heavy Duty Universal Mobile Base Stand with 4 Swivel Wheels, for Woodworking Equipment, Bandsaw, Power Tool, Machine

Overall, this is great It's very sturdy and the four wheel casters make it easy to move around. Its price makes a good value. I found it a little complicated to assemble, requires an odd mixture of wrenches and sockets, but not too difficult. I added a piece of plywood for the bandsaw to sit on. It's a little bigger than I needed (for a 14" Delta bandsaw) and takes up more floor space than I would have liked. But overall, I am happy with it. I wanted to be able to move my bandsaw around, and this does that very well.

I have this under a 3HP Delta Unisaw with 52" extension table. It holds the weight with no problem, rolls smoothly (almost too smooth, I discovered my shop floor isn't level), was well made, and easy to set up. Everything lined up perfectly. Box was slightly damaged, and the small baggie of nuts and bolts was open with bolts rolling around, but everything was there.

Very good quality

Heavy duty works great. No problems at all.

Well-made design with sufficient capacity. This base was for my heavy 20" Craftsman floor model drill press (took 2 of us to lift and tilt it back to its upright position). Mounting holes didn't line up exactly where I wanted, but I expected that. I welded mine together in lieu of using the supplied bolts.

I purchased this mobile base for my new Jet Drill Press that weighs 282 pounds. I found the base to be heavy duty and constructed and painted very well. The assembly was straight forward and intuitive. I used a piece of 3/4" plywood and bolted it down in the middle of the base and then mounted the drill press on the board. The base has very low clearance and thus minimizes increasing the overall height of the mounted item placed on the base. Love this base and will purchase this unit again for other large /heavy tools.

I purchased the mobile base for my Delta table saw. The quality is there and it works perfectly, so easy to maneuver around. I would highly recommend this product. So far everything I have purchased from Vevor has been very well built and excellent quality.

Another winner from VEVOR. I bought 2 of these, 1 for my Sawstop 3hp PCS and the other for my Jet 14” bandsaw. They are super heavy dudy and work perfectly. Thanks!

I had a base for my table saw but it wasn't built strong enough. It used 4 metal corner pieces with wheel casters held together with 2x2 lumber. This base is a beast. Easy to put together and very well built. You can adjust the length and width to suit your machine. My table saw weighs about 200 to 250 lbs. This will make it a lot easier to move around in and out of the garage for work around the house.

better than I was expecting. Used it to hold my jointer. Cut one of the side support pieces in half to fit the machine better and 1 support was able to do both ends. Hope it stays like this long term