Customer Reviews for VEVOR Mobile Base, 295.5 kg Capacity, Adjustable from 304 x 304 mm to 914 x 914 mm, Heavy Duty Universal Mobile Base Stand with Swivel Wheels, for Woodworking Equipment, Bandsaw, Power Tools, Machines

I purchased this to use with my Jet 10" cabinet saw, and it makes moving around this beast easy. The four adjustable lever-based locks raise the saw up off the casters so the base plants the saw firmly on the floor. Very heavy duty, good quality casters. Be sure to check dimensions of your tool as the rails were set to almost the smallest settings on one direction for my table saw - a smaller tool base might leave too much base sticking out in the way. My saw has an extension table, so I needed to purchase a base extension from a different manufacturer and modify it to attach to this base - not difficult to do, but I could not find an extension made by Vevor themselves. I have had this in place only a few days but I can't imagine it won't last for year and years, given that it is beefier than other bases in my shop and I've had no issues with them over 10-15 years of use.

I purchased the mobile base for my Delta table saw. The quality is there and it works perfectly, so easy to maneuver around. I would highly recommend this product. So far everything I have purchased from Vevor has been very well built and excellent quality.

Another winner from VEVOR. I bought 2 of these, 1 for my Sawstop 3hp PCS and the other for my Jet 14” bandsaw. They are super heavy dudy and work perfectly. Thanks!

I had a base for my table saw but it wasn't built strong enough. It used 4 metal corner pieces with wheel casters held together with 2x2 lumber. This base is a beast. Easy to put together and very well built. You can adjust the length and width to suit your machine. My table saw weighs about 200 to 250 lbs. This will make it a lot easier to move around in and out of the garage for work around the house.

Super produit m'ayant permis de transformer mon établi pliable en établi à roulettes avec dessous un espace de rangement.

Works as it should. Be advised, though that 1/2\" plywood is likely not going to be a satisfactory base. My Dewalt scroll saw and stand bounce pretty good both up and down. Absolutely not the fault of this kit. Totally an issue with the base materiel I chose. This kit was a good value and seems well made.

better than I was expecting. Used it to hold my jointer. Cut one of the side support pieces in half to fit the machine better and 1 support was able to do both ends. Hope it stays like this long term

Bought to put my 30 year old table saw on to more easily move it around. Install instructions are porr as with most vevor products. Easy to figure out Could use about 4 more bolts to hold the frame together better.

I did a lot of research before purchasing this for a saw that I fixed up for a neighbor. It is very heavy duty, the four swiveling casters were just what I was looking for and the foot operated feet effortlessly raise the wheels off the ground. I had cut down the longer side by one bolt hole to better fit the saw and tapped another hole but that wasn't really nessasary, I'm ocd about things matching. Would definitely buy again.

This is very heavy duty. Mine is currently supporting my 500+ point jointer. I am very happy with how stout this is. The stand was easy to put together and when adjusted correctly (it isn't hard) the legs immobilize the unit for safety when using the tool. Four rotating wheels rather than two static and two rotating is a wonderful and rare feature for a unit this strong. My jointer is a lot more accessible now that it can be rotated and turned easily. Previously, I had to do the \"Austin Powers golf cart in a tiny hallway 500-point turn\" to move it. Now it glides with relative ease. That said, I wouldn't recommend it unless I believe it is safe. It is an affordable rolling base and a good value.