Customer Reviews for VEVOR Mechanical Keyless Entry Door Lock, 14 Digit Keypad, Water-proof Zinc Alloy, Outdoor Gate Door Locks Set with Surface-mounted Latch, Keypad and Knob, Easy to Install, for Garden, Garage, Yard

Seems like a good lock for the price. Read the instructions closely as they are so so. Do not cut the flat metal piece that operates the indoor latch until you are sure of the exact length. Also test the lock with door open several times before closing and locking door. Overall I am happy with the lock.

Excellent product. It enables me to use a side gate securely. Easy to install and set-up.

Work as advertised. It would be perfect if the lock bar movement was a bit longer.

The written instructions to change bolt direction I'd a bit loose. The video on YouTube is what really helped in that efforts.

Easy to install and use, nice black finish. Easy to set code but order of digits makes no difference

Just installed. Instructions could be improved and video slowed down to focus on important adjustments.

The door lock arrived faulty, as the front panel is totally disabled and does not work. You can open it from the front but you can not close.

Tut was er soll- ist aber recht plump und schwer. Wer keine Batterien oder Kabel nutzen möchte ist hier richtig. Einen Designerpreis würde ich allerdings nicht vergeben.

Be aware the write up says 100mm door width. This is incorrect. It is 70mm. I had to buy new door handles bolt screws costing me an extra £5. Unfortunately no time to return. Needed to secure my shed but not happy been misled on the write up

Installation is not easy because of the flat bar for actuating the lock. The instructions are sorely lacking in this regard. One end of the bar has two "dimples" which must go into the combination side of the lock. There are 2 different lengths provide. I found that neither one worked for a 3.5" install and the longer one had to be cut. I cut it too short and did not have a working one because I inserted it the wrong way around. I ordered a replacement unit rather than try to get the part from tech support. Good thing I did too because the original one would not stay open fully, but "rebounded" about .5 inch not allowing the gate to close fully. However once I replaced the combo side3 of the lock with the new unit, it worked. I also rebuild my gate with 2x6s laid with the 1.5" side to mount the lock so that was room for the mechanism without having to add a block.