Customer Reviews for VEVOR Mechanical Keyless Entry Door Lock, 14 Digit Keypad, Embedded Outdoor Gate Door Locks Set with Keypad and Handle, Water-proof Zinc Alloy, Easy to Install, for Garden, Garage, Storage Shed, Yard

Two issues: (1) the lock is not tall enough to cover a pre-existing deadbolt hole. In fact, you'll need to bore a hole thru door just at the bottom of the deadbolt area. You won't be able to use a deadbolt because the lock (height) covers a portion of the deadbolt hole. (2) All locks are keyed differently. I ordered 5 locks and no two locks have same key. So I have a couple of key rings with five keys on them (each key must be labeled for its door). The locks are mechanically sound. I've been using them for a few weeks and other than the above mentioned issues, I feel they are a good value for the price.

Okay fro the price but not as good of quality as one from a lock smith

I recently bought 2 for each side of the house but for the way my gates are build does not work. Quality it’s okay don’t think it would last longer the. A year with the Florida weather. So I returned both

Das Türzahlenschloss ist etwas mikrig ausgeführt,...nicht so leicht zu montieren. Die Vierkantbolzen sind zu kurz, habe mir längere im Baumarkt besorgt.

I bought these looks for my 6 year old son with non verbal autism who is a major flight risk. The locks worked great and are the only thing that keeps him safe but I would love to be able to have them replaced since it has not even been 1 year.

The lock was damaged, so I'm going to return it

Tut was er soll- ist aber recht plump und schwer. Wer keine Batterien oder Kabel nutzen möchte ist hier richtig. Einen Designerpreis würde ich allerdings nicht vergeben.

Be aware the write up says 100mm door width. This is incorrect. It is 70mm. I had to buy new door handles bolt screws costing me an extra £5. Unfortunately no time to return. Needed to secure my shed but not happy been misled on the write up

I had a lot of hope for this lock since it had all the features I wanted. Unfortunately there is a design flaw that ultimately led me to return the product. The hole (on the back) where you turn the lock handle direction is small and if you use a common screwdriver bit it damages the ridges used by the flat bar. I cannot find such narrow bit that would work. This seems like a specialized tool that vevor should provide, or redesign the hole. More troubling though is the endless back and forth with the support team who promised me that 'engineering' would research and get back to me. Twice I had to contact support to find out a status. 'Engineering' never provided any response. Support didn't want to provide me a refund. Eventually I just sent the product back and asked my bank to refund me on my credit card. Cost me $20 to send it back since it was a bit heavy. Vevor did not reimburse. Sorry, this is way too much trouble for me to with this merchant in the future.

Installation is not easy because of the flat bar for actuating the lock. The instructions are sorely lacking in this regard. One end of the bar has two "dimples" which must go into the combination side of the lock. There are 2 different lengths provide. I found that neither one worked for a 3.5" install and the longer one had to be cut. I cut it too short and did not have a working one because I inserted it the wrong way around. I ordered a replacement unit rather than try to get the part from tech support. Good thing I did too because the original one would not stay open fully, but "rebounded" about .5 inch not allowing the gate to close fully. However once I replaced the combo side3 of the lock with the new unit, it worked. I also rebuild my gate with 2x6s laid with the 1.5" side to mount the lock so that was room for the mechanism without having to add a block.