Customer Reviews for VEVOR Manual Wire Stripping Machine, 1.5 mm-30 mm Copper Stripper with Hand Crank or Drill Powered, Visible Stripping Depth Reference, Portable Aluminum Frame Wire Peeler for Scrap Copper Recycling

Doesn’t work with smaller wires. 12-14 gauge. Wire keeps jumping to the side of wheel and jams. Haven’t tried it on bigger wires.

Ήρθε γρήγορα , το δοκίμασα σε κάτι καλώδια μικρά 1,5 είναι δύσκολο δεν τα πιάνει πάντα το πετάει έξω έχει λίγα κενά ο αξωνας και παίζει λίγο με αποτέλεσμα να το πετάει έξω σε ποιο χοντρά δεν το δοκίμασα γενικά είναι καλό αλλά θέλει υπομονή μέχρι τώρα έκανα 5 κιλά χαλκό

dose not work with stain small wire ,lots of adjusting on larger wire , wire wants to jump off track and go between the cutter wheel and side of unit.

The only thing this cable stripping tool is good for is the larger 3/0 cable sheath. Useless on small gauge wire sheathing.

Mala calidad,los rodillos no cortan,muy caro para un producto que no funciona bien

Can't quite figure out how to get this thing working correct and dialed in.

The stripper I got wasn’t the one that I wanted, it’s not great at stripping wire, I would like to switch it with the one that I wanted

Blade is not sharp, wire goes off to the side of the cutting wheel even when the closest size guide hole plate is used, does not cut through the center of the wire and had to run it through multiple times. I'm going to have to create a centering guide that can be attached to the plate to keep the wire centered in the cutting wheel ,and had to sharpen the cutting wheel.

Everything works great for the most part. I just wish that the main shaft was even when you turned it on it pivots up and down and cut the wire oddly wish it was as easy as just switching it out because the product seems good other than a miscalculation on the balance.

Didn’t unpack item from box for a while but when I did the black plastic knob was cracked making hard to adjust the height. At which now it was too late to return. Regardless of this knob being cracked the V angle where the wire feeds and runs through does not hold the wire in place for a proper cut of the sheathing. I know some may say user error but I tried a number of times with the same result, resulting me to just use a sharp blade to remove the sheathing. Some may have luck with this product but I don’t think I would purchase another.