Customer Reviews for VEVOR Manual Honey Extractor, 2/4 Frames Honey Spinner Extractor, Stainless Steel Beekeeping Extraction, Honeycomb Drum Spinner with Lid, Apiary Centrifuge Equipment with Height Adjustable Stand

This unit will work for 2 deep frames or 4 medium frames. For a small scale operation it works okay. Assembly was easy. Pros are the price. Cons are that if you are using a screen sieve on top of a 5 gallon pail to collect the honey you will need to set it on 2x4s or the gate won’t be high enough to clear it. Not a deal breaker. Instructions suggest bolting the legs to plywood but I used it without doing it. You do not have to spin the frames fast in order to spin out the honey. A couple of minutes per side is all you need.

Our extractor arrived quickly, and works wonderful, but when it arrived one half of the lid was broken into pieces. I took a picture and emailed it in, but never heard a real back. It would be nice to have the lid completely in tact, if pos

Bad customer service no free return

It was a good machine for a small honey harvester. I used it two seasons, harvested around 400lbs of honey and the leg weld broke. Ihad it bolted to the floor and did my best to be careful amd easy with it. The legs are not attached well at all. AND when I originally looked at the product the advert was misleading because the legs LOOK like the bolt on. It was decent for $125. I wouldn't buy it again though.

It wobbles A LOT, even after I bolted it to a sheet of plywood, with 2 frames or 4. It does it's job and is one of the cheapest extractors I could find, I just wish it didn't wobble so much. I may try to beef up the flimsy legs before the next time I need to use it.

Pentru cei cu rame mici este excelent.

Ich hab die Schleuder jetzt einmal benutzt und es war ok. Negativ Von den halbherzig angebrachten Fuss-Metallplättchen an den Beinen war eines schon abgebrochen, als das Paket ankam, ein zweites hat sich dann verabschiedet also ich Holzklötzchen anbringen wollte, um nicht den Boden mit den scharfen Kanten zu zerkratzen. Ich hab jetzt 3 alte Tennisbälle angebracht. Unwuchtig darf man natürlich nicht schleudern, aber alles in allem sind die Beine schon mega wackelig. Vielleicht muss ich mir da in Zukunft noch bessere basteln. Positiv Es funtkioniert. Wir haben zu dritt geschleudert, jede konnte mit dem Fuss ein Bein stützen. Ich hatte kein schlechten Gerüche - vielleicht etwas metallisch nach dem Auspacken. Aber ich hab sie vor dem ersten Gebrauch noch ordentlich geschrubbt, danach war gut. Ich hatte eigentlich gedacht es passen nur 2 Zander rein, aber es waren dann 4 - auch wenn es für 2 recht eng war. Fazit: Da ich zum Putzen in der Dusche und dem Verstauen im Keller die Beine häufiger an- und abschrauben muss, werde ich die Muttern zum Befestigen der Beine durch Flügelmuttern ersetzen. Es ist ein günstiges Produkt für den Hobbyimker, der noch nicht weiss, wie sehr er/sie in das Thema eintauchen mag. Wenn man sich einigermaßen zu helfen weiss, dann ist die Schleuder voll in Ordnung.

For a first extractor, this one is not bad at all and very easy to use. You do have to work with it quite a bit to get it stable and wind up the frames slowly to keep everything in balance, but for a first piece of equipment it did just fine.

It functions well so far but the lid does not attach and when spinning, the frames sometimes hit the lid as it's moving around unless I held it with my free hand and that was hard to do! I'm not sure if there's something missing or not. Seems like the lid should be attached on hinges. Also, there's no brake

The honey extractor has the lowest quality of legs. The legs are so flimsy that the extractor acts like an off balance washer. I laid my body across it but it didn’t help. I am going to have to have new legs made that are sturdy. Only other complaint was one of the screws that holds the crank in place was bent. Other than those two things I wish Vevor had pointed out that the four sides were not the same side.