Customer Reviews for VEVOR Manual Honey Extractor, 2/4 Frames Honey Spinner Extractor, Stainless Steel Beekeeping Extraction, Honeycomb Drum Spinner with Lid, Apiary Centrifuge Equipment with Height Adjustable Stand

Delivered quickly. Exactly as described. Worked well for honey extraction.

Works as expected

did not see anything that except for the top covers, when frames rotate around they can hit the little knobs that hold the cover in place. you can make a easy work around for this. thats the only thing I see they need to improve on.

Für den Preis eine super Schleuder für geringe Mengen

I liked how easy it was to put together. I would recommend bolting or screwing the legs onto a piece of plywood. If you spin it super fast with uneven frames, it will get really wobbly. We extracted about 2 1/2 gallons of honey using this and I feel it was worth the research and the money.

Good product does gets the job done but... I had to bolt it down not just on the bottom of legs because it was very wobbly even after it was secured at the legs still wobbled alot like it was off center... it's super easy to assemble it's the size is as advertised i still use it so the value was worth it to me just be aware that when you speed up the spinning it will wobble alit unless secured well

Decent unit. For a small-time beekeeper like me (2 colonies, 5-15 gallons per season) it's fine. The lid pieces are poorly designed and could be better engineered, as they don't fit snugly or securely. I used my bench grinder to remove about half the material on the plastic lid retainers so they no longer make contact with spinning frames. I wish the unit held more honey before the bottoms of the frames start making contact with the honey, which means you have to stop everything and dump a couple gallons before you can resume spinning. It's great to preserve the comb so the bees don't have as much work to do when I eventually get these back into a hive. I need to put some recessed nuts in my shed floor so I have a more secure unit, but even using it freestanding isn't bad as long as your load is balanced. All in all, a good unit.

My frames were slamming against the crank assembly so.. I had to cut about a half inch off of the shaft on the basket assembly (lowering the basket to make more room at the top). Now, it works.

It is a good low end extractor. The feet on my extractor has broken off after the first use. That is easily over come. I'm just concerned with what will be next.

Good product, make the job.