Customer Reviews for VEVOR Linear Actuator 12V, 10 Inch Heavy Duty 1320lbs/6000N Linear Actuator, 0.19"/s Linear Motion Actuator with Mounting Bracket & IP44 Protection for Electric Door Industrial Machinery Vessels Cargo

Bardzo mocny, dobrze wykonany.

très réactif

prodotto molto solido robusto sono soddisfato per la precisione poco rumoroso io lo uso per servocomando veloce nella spedizione complimenti velocissimi e consegnato con cura grazie

Very strong works well will lift a outlander 1000 no problem

prodtto di qualità. rapporto ottimo con il prezzo

Très bon produit bien emballé. Amélioration proposée : la description des interfaces mécaniques

The user thought the product was very good and gave it a 4-star review.

Rien a dire de particulier, fait se dont pourquoi il est prévu, à voir la durée dans le temps

En vielä kokeillut, mutta tuskin rakenne kestää 600kg, ehkä 200kg. Muuten näyttää asialliselta tuotteelta

Amazing push. Replaced the hydraulic cylinder on a 1000 lb lift cart. Still lifts at least 300 lbs (which is the most I've tried). 11" to 33" in ~25 seconds. Running on a Ryobi 18v drill battery. The maximum draw I've seen is 11 amps. But only for a second when starting from the lowest table height. I replaced the 30 amp fuse included with the battery holder with a 10 amp and it hasn't blown. Runs about 6 at mid to max heights in up mode. Down is less than 3 in any position. I won't be using it below 20" and only for a few inches/seconds at a time. I'm sure it will tolerate the extra 6 volts for my use. If not, I'll replace it and find a 12v solution. The bushings that reduce the base clevis from 12mm to 10mm are soft plastic and one was split. I didn't need them. It's odd that the piston clevis is 10mm and the base is 12mm. The included brackets are thin bent sheet and I wouldn't use them at high load. They wouldn't work for me anyway. Works better than my expectation in both speed and lift. I'm guessing adding a second actuator will give >500 lb capacity.