Customer Reviews for VEVOR Industrial Water Chiller, CW-3000(PRO), 150W Air-Cooled Industrial Water Cooler Cooling System with 12L Water Tank Capacity 18 L/min Max Flow Rate, for Laser Engraving Machine Cooling Machine

Pour l'instant ok, mais le reservoir est un peu fragile, nous souhaitons en commander un, comment l'obtenir ?

bon produit

Alles Bestens - Lieferung schnell - gutes Preis-Leistungs-Verhältnis.

I bought this as a quick replacement for my other chiller when the pump failed. It seems to do the job fine, but is significantly louder than my S&A chiller (like a LOT louder). I can't complain for the price, but if noise is any issue for you, you'll need to look at a higher quality chiller.

After a two weeks of the use, I am not happy how noisy this thing is once the compressor kicks in. I have set up the chiller to 17 degrees and the compressor starts working when the temperature reach 19 degrees. That is fine, but it behave strange I would say. It brings the temperature down to 18.3 degrees, then it goes up to 19 and finally down to 17. Then the compressor stops, but temperature keeps going down to around 14.5 degrees. It takes around 10-15 minutes and those are very noise minutes :) Overall, it does it's job so can not complain about that, but that noise....

This unit is exactly what you would expect. It is a cheap fan cooled water chiller. Do yourself a favor and open it up before using it. The power supply in mine was loose and needed to be zip tied again. There were several hoses with loose zip ties(they use zip ties instead of hose clamps). Give it a good look over before installing it. I'm happy with it though. It looks nice and functions well for my needs.

System works well but when it came it had to be recharged with freon to make it work so we had a little expense to add but after that the product is easy to use and works well.

Quando è arrivato il chiller, perdeva acqua dall’interno Ho richiesto in assistenza per il problema, e come dovevo comportarmi ma non ho ricevuto risposta ho aperto il chiller ed ho trovato il tubo che dal serbatoio alla pompa dell’acqua era completamente staccato ho inviato foto, della riparazione ma sono stato ignorato, Mi dispiace perché la ritengo una azienda valida ho acquistato in passato un pialla a spessore e delle lame di ricambio, e sinceramente non mi sono mai trovato male, se la sua visione de solamente vendere , e non assistere i clienti, nel prossimo futuro starò attento alle scelte che dovrò fare.

It works out of the box with the default settings ok. However: configuring anything on it is a great pain. The device has 4 rubber input buttons and for doing any configuration you need to simultaneously press them for a certain time. Some I did not manage to make work. The documentation is really bad. I wish it came with a remote for user friendly operations, and with a decent manual.

This machine has been defective from the start. Each time Vevor have stalled on addressing issues. Water pump replaced but issues with safety of machine as it still runs when open which is against standards. Significant wobble in left to right axis movement which is causing sparking or arching. Machine jumps when cutting and does not perform safely. Has been checked by professional. Refund requested and evidence provided yet still delays. This leads me to believe it’s a deliberate tactic to take outside timeframes for PayPal and other avenues of dispute. Will never buy another product from Vevor - bastardized products with defective and inferior parts. Customer service is essentially non-existent. Noting machine won’t cut even at 90% 10-15/s photos show doesn’t even mark on 3mm laser ply or even 2mm. Also note mirrors are aligned and offsets set.