Customer Reviews for VEVOR Grease Pump, 40L Capacity, Air Operated Grease Pump with 3.88 m High Pressure Hose and Grease Gun, Pneumatic Grease Bucket Pump with Wheels, Portable Lubrication Grease Pump 50:1 Pressure Ratio

Loved it it’s very convenient and practical. Would like to know where to get the grease for it. Would by it again.

Prodotto valido, acquistato per uso semi professionale, ben costruito, funziona perfettamente e ha molta forza. Occorre vuotare il grasso nel contenitore, non è possibile inserire il secchio all'interno. 4 stelle perché non è corredato di attacco per ingrassatore standard, che ho dovuto acquistare separatamente.

Assembly was basic. If you know what a zerk is, you can figure this out. Serious positive: The hoses are high quality. The whole unit is actually well built and hasn't shown any functional issues. Why only 4 stars? I really wish it fit standard buckets inside instead of being forced to shovel in from the pail. I freely admit it's a small complaint. As normal, I will update this if anything changes/breaks.

Très fragile ça casse vite

Does not hold a 20L drums of grease, you need to transfer the grease into it manually. Quite a misleading advertisement.

Bucket latching system is no good and will not grease zirks. Modified it to fill autogreasers on equipment

Overall the grease gun seems to function fine. I had issues initially with the gun nozzle pushing way too much grease and the gun trigger being way to hard to pull. I was using it at my compressor output pressure of 130 psi. Once i turned the guns regulator to about 40 psi I have better control. I would still like it to have a slightly higher pressure for some of my excavator's tighter fittings, but increasing the pressure also increases the flow quantity so I am sitting at a middle ground. So that would be a complaint. I can't have the pressure I want unless I have way too much grease come out all at once. The other issue is that the grease container is not sealed. I filled it with 5 gallons of grease and the next day a small puddle is oozing out between the seam of the bottom and sides of the container. I wish I would have known this and I would have run a bead of silicone at the joint before filling it. That would have been a quick easy fix. But Now it is way too much work to scoop all the grease out, clean it all up to calk it. Or if vevor could have just welded the seam more carefully. Overall this works fine for the price but the overall fit and finish if the tool is a bit less then I hoped.

This pump been used for around a year, after warranty is over the pump plate that push the grease down got damaged for no reason, when we tried to replace the grease bucket we found the plastic plate damaged to 2 pieces, now the pump will not push the grease down and we have to do it manually each time the grease get low, if you like this pump get a protection plan, otherwise the quality is stuck.

The grease controller doesn’t work for my large truck applications ! The canister is leaking around the base of the can. Had to order a new controller?

This pump is too short to fit on 20kg grease drums. They expect you to put grease in the tub manually. It will not fit a 20kg grease tub as just a bare pump it is too short. It also comes with non standard threaded fittings unavailable in Australia. Yes it pumps grease but no I would not buy it again