Customer Reviews for VEVOR Post Hole Digger Gas Powered, 63CC 2400W Earth Auger, Gas Auger with 200mm Auger Drill Action Design Bits & 1 Extension Rod, Post Fence Hole Digger for Farmland Garden Plant, Orange+Black

Va bien, pero se ha partido la soldadura

The user did not leave any written comments.

The machine had wires that where not connected. I did write to vevor . In the end I took the relevant part to pieces and reconnected the wires . The machine works fine now this has been done . When vevor asked for photos of what was broken this was impossible to do .as nothing could been seen. And as it was taken to pieces it just got fixed

The auger has had some times it has performed well, but there have been some hiccups. It arrived with two of the handle bolts just placed loosely into the box. One of them jammed itself between the cover and the engine. It took some time to get it out of there. After using the auger on ten holes, it refused to start the next day. After taking the spark plug out, I noted it was covered in black liquid. The unit would only start by using the spare spark plug that was provided. Similarly I have had to remove and thoroughly clean the spark plug twice more as the project has continued. That has slowed down our progress. Yet, when it works, it works well.

Not bad for what it is it shook apart so we had to stop and go though it all. The throttle kept getting stuck open during use which is pretty dangerous. but as expected for a low cost tool. Renting one for the week would of been a lot more. The drill bit on the one snapped off after about 60 holes and would not dig anymore. Still better than doing by hand.

Not sure how someone thought this worked well in hard soil. My soil must be like concrete then. After about 5 or 6 inches, the unit would bog down and I would have to remove it and try again. Maybe it’s because it’s got the 8” auger and not the 6”. The weight of this one person machine is as heavy as some 2 persons machines that I have used. But, as someone mentioned, that weight probably helps bore the hole and it might in “normal” soil, but not in my hard pan.

Poor package design allows the auger bit to hammer the bottom of the motor. Ordered 2 of these and they have identical damage. Ontrac also dropped and threw them while delivering.

Second hole air filter cover fell off due to stripped threads contacted VEVOR for repairs still waiting on Parts. Definitely not the best quality post hole auger. Job postponed for 2 weeks now as I wait. Costing more lost revenue than the auger is worth.

Colis bien reçu, cependant dès la 1ere utilisation la pointe du forêt 8 pouces s’est cassée, les goupilles permettant d’ajouter les rallonges ne sont pas suffisamment solide. Sinon la tarière a l’air solide si l’on fait abstraction de l’équipement annexe

I purchased the 52cc auger. It worked great for a few holes. However the plastic sheathing holding the wires and throttle cable got caught on the 10” bit and broke. Obviously this was my mistake as I should have used the zip ties and fastened the tubing down to the handle bars. I went off pictures of the completed tool online and noticed zip ties were not used as the tubing and wires just hung freely. Lesson learned the hard way. I was able to repair the black and red wires, not sure how long they’ll last. It would be nice if Vevor sold a throttle cable and wire assembly separate. Now I’m stuck looking for an off brand throttle cable. The end of the cable that connects to the engine, broke off so now the cable has no way of staying in the slot on the engine.