Customer Reviews for VEVOR Clamp On Pallet Forks 50inch Length, Tractor Bucket Forks 990lbs Lifting Capacity, Bucket Forks For Tractor Loader Skid Steers, 2 Heavy Duty Steel Loader Bucket Attachments, in Blue

Lifted my load great. Cross member broke, allowing the forks to move. Screw down bolts need to be separated more, so they don't hit each other or change to a large bolt head.

They are hard to tighten on the bucket. Also they will loosen and turn or fall of the bucket. Needs a more stable way to attach to the bucket.

I always get things shipped quickly from Vevor. The quality of these clamp on forks is extremely good, thick metal and good welds. The only thing I would recommend is to spend a bit more and get the 60”. These seem just a bit short.

Read description carefully forks do not have a 60 working length seem to be holding up ok didn't fit my bucket verry New bucket cutting edge. Is to thin for the front of the forks to clamp on tight

Does what I need it to do. The design isn’t great if you store your tractor outside because they hold water. Not sure how long they will last.

Does the light lifting to off load deliveries that I needed. Can't ask for more. Easy to attach and connecting arm keep forks aligned

Expect max. Lift weight to be reduced. Don’t get the spreader bar.

Good to work aroud the house, but falls of easily when you try to get out of an heavy pallet. Overall satisfied

Bien pour les volumes, bon il faut être conscient que les godets ne sont pas prévu pour de grosse charge en port a faux, acheter en étant conscient que ce kit et pour des volumes perso des piles de 10 palettes Europe vide Ras

I like these forks, as they are strong and mostly well built. I've used them with my tractor to move quite a bit around my shop... all of it under 1000 pounds. They've not given me any issues. However, the mechinism that is used to clamp them to the forks could use some revision! It's difficult to tighten the clamps down, as the handles will hit into each other when rotated. This could have been easily fixed by making one of the bolts slightly longer than the other. then they would clamp down at different heights. Also, since they are so short it is best to have a \"cheater bar\" handy. I used a 9\" piece of pipe to add a little extra torque to the bolts. Other than that, these are a great addition to any tractor!