Customer Reviews for VEVOR Fire Pit Spark Screen Round 20", Reinforced Heavy Duty Steel Metal Cover, Outdoor Firepit Lid, Easy-Opening Top Screen Covers Round with Ring Handle for Outdoor Patio Fire Pits Backyard

It takes a bit of effort to put together but once it's done it's pretty solid. For the $$ I would think no assembly required.

Not super easy to put together, be careful of the sharp edges and don’t tighten the screws all the way until they are all in. Once it’s together it worked perfect and kept the sparks out.

I put it together easily, wait to tighten the bolts until the end. I doubt the nuts and bolts are stainless and will likely rust in the rain.

Fits the Solo Bonfire 2.0 almost perfectly. It is the same outer diameter (OD) as the fire pit which is good, but would fit much better if 1/2\" shorter than sit within the outer ring. Assembly was fairly intuitive but clunky. No extra pieces so don't loose anything. Overall, pleased with the purchase for ~$25.

Item is very sturdy but assembly wasn’t easy because parts were not clearly marked,

Cheaply made, but does the job. You get 4 identical pieces that overlap at the edges to form a dome, plus a thick plate on top with a loop for lifting. The pieces have RAZOR sharp edges, and the holes barely line up, so they recommend leaving the nuts loose until all pieces are connected. It would be nice if the top piece was dome shaped rather than flat, but that would have cost another penny or two. Don’t expect perfection, and you might not be disappointed. I mostly bought this to burn documents in my smokeless fire pit without pieces of burning paper flying out.

Reçu et assemblé hier. Semble solide et de bonne qualité. Assemblage facile. Reste à l'essayer et tester sa durabilité. À suivre... 1er essai fait. Solide et conserve sa forme originale. Bravo

The spark screen does what it's supposed to. I've only used it a few times but so far I haven't seen a single spark get through while. It's nice to know that I can reduce the risk of the neighbouring forest burning down. Assembly was straight forward but some of the metal edges are sharp so have gloves ready if you're wary. I would suggest adding a jam-nut to the pivot bolts to prevent them working lose during usage and having the halves separate. Other than that, it's money well spent.

Der Funkenfang tut, was er soll. Besonders bei nahen Bäumen und Hecken.

Prima en degelijk