Customer Reviews for VEVOR Pallet Forks, 1814 kg Capacity clamp on Pallet Forks, 1490 mm Tractor Bucket Forks, Heavy Duty Front Loader Attachment for Tractor, Loader Bucket, Skid Steer, Tractor Forks for Agriculture Farm

Quality of steel forks are really good but the center likes to pop out sometimes. If they made the center a little more steady it would be pretty good product.

Get what you pay for within a couple days the paint on the forks flaked off peeled off. Tighteners are difficult to work with. If you can afford it by high-end.

Die Gabel selbst hält die 1000kg vielleicht aus aber nicht die CAT1/CAT2 Bolzen. Habe damit ca. 400kg gehoben und die Bolzen sind verbogen.

I found the forks absolutely useless and a complete waste of money!!! First, I had to file the divider down to fit it over the forks. Second, When I tightened the bolt to keep the divider at a constant width, it snapped quite easterly and Third, The forks wouldn't stay tight on the FEL bucket, it didn't matter how tight I initially tightened them. Typical CHINESE RUBBISH, I should have known better. I would be VERY hesitant to buy anything from Vevor again.

They are a little flimsy but work ok for what I need to do.

They are a pain in the A## to use, always slipping, even with a plate under the hold down area, they bent my bucket. I will be welding them permanently to a plate

Was moving rafters and some how bent one of the blocks that tighten it down with my 35 hp tractor

I was disappointed when I got these. The pads used for the mounting screws are just nuts loosely threaded on. When you go to tighten them, the nuts spin on the screw and will move up. When you loosen, the nuts fall right off. Very cheap design. If you are putting the forks on one time and leaving them, it would be okay. But if you are constantly taking them on and off, it is a big deal.

I did t rate it hi because its not strong enough for my use. If you're just going to make straight pics its fine but it twists easily and comes apart easy. I will find a stronger one. I wasted my money on this one

The 3 point hitch pallet fork might actually work well, but I wouldn’t know because the box was so destroyed by ups when I received it that all the hardware pins were missing. I’m sure they are rolling around in the back of an ups truck somewhere, but that doesn’t do me any good. I’ve contacted VEVOR twice about this and was told both times someone would contact me within 24 hours, but I have yet to hear from anyone.