Customer Reviews for VEVOR Pallet Forks, 907 kg Clamp on Pallet Forks, 1090 mm Total Length Tractor Bucket Forks with Adjustable Stabilizer bar, Heavy Duty Pallet Forks for Tractor Attachments, Skid Steer, Loader Bucket

Only had a short time, but seem to work great. Will definitely help with moving tubs for cows. Easy to put on bucket and adjust.

Great forks for the money. They can be a bit hard to clamp tight enough to hold.

First off I want to say that these do work for very light duty tasks. Does great for moving things around. They do come loose after using for a bit so definitely want to check them to ensure they are secure. I would also recommend paying a little extra for the longer ones. Overall though it works as intended.

First off, they do work. For light work or picking up loaded pallets or whatever else your tractor can handle in terms of weight. Now the caveats, there is only a single connection point for securing the fork to your bucket and literally, it is a tiny single point. There is no plate underneath the bolt that you secure to the bucket. This is a problem because now it is a pivot point and it is a pain to securely tighten the fork down (hence why the 4 of 5 stars for sturdiness, you can never secure it tight enough, where they will not pivot). So unless you approach and fork straight on, you run the risk of bumping and adjusting the fork, so it is no longer straight. I wished they would have included a plate with the single bolt as they do with the two-bolt system. It would be safer and run less of a risk of the fork twisting on you. Now, the advantage of them not installing a stabilizing bar between the two forks it allows you to adjust your width as needed and is easier to store and move, so bonus on the forward-thinking, plus this set is half the price. But again the biggest issue is there is no plate to help keep the fork from twisting on the single bolt connection pair of forks. But they do make a model with an adjustable stabilizer bar and the secure points with the plates, but it is also twice as much. For the PRICE point and what the forks can do, it's more limited to what your bucket and your tractor can do. I installed my pair on my JD 790, they work great, and besides the issue mentioned they work great.

Product as described. Functions well on my Deere 1023. Shipping / tracking was VERY BAD! It took longer than expected to arrive.

So far it seems to be working really good if it keeps working like this, I will raise my score to a 5 all the way across

Compression plates won't stay in allowing forks to move around on the bucket because you can't tighten them up enough. But it works

Forks great just dont fit my bucket well because of step on bucket. Other than that no problem If bucket was flat would mount great. I just got to build something so they will clamp more securely.

These 4000 lb. pallet forks should have come with a stabilizer bar to limit side to side movement, the same as the smaller forks. Also, the screw down rods (2 each fork) would be much better with a nut welded to the plate and the rod would then screw down into the nut. As it is the nut is attached to the screw rod, and as soon as the nut reaches the plate, the whole plate slips and slides sideways. This causes paint to be removed from the plate and constant repositioning of the plate while tightening.. This would not happen if the nut were attached to the plate as the rod would hold the nut and plate in place.

Pallet forks are well constructed and very solidly made Unfortunately, had trouble mounting on our tractor bucket being impossible to secure without using a pice of plywood under the clamp both to stop it slipping when tightening The forks could really benefit from having a connector bar between the two to stop side ways movement Other than that have been quite useful but need to stop and tighten after a few uses