Customer Reviews for VEVOR Bucket Tooth Bar, 1200 mm, Heavy Duty Tractor Bucket 6 Teeth Bar for Loader Tractor Skidsteer, 2000 kg Load-Bearing Capacity Bolt On Design, for Efficient Soil Excavation and Bucket Protection

Installed this bar on my Bobcat CT1025 and it is a nice upgrade. It is tough, digs great and tears out heavy brush with ease. Installed easily. I did have to cut a 1/2 inch off the sides to make it fit on my bucket. I do like the rivet fastening system.

Seems very heavy duty I think it will last. Shipping was excellent. The only thing you better have a hell of a bit to drill through your bucket to attach it permanently it also clamps on but didn’t hold for any heavy duty work

Very well built and strong

The inside dimension of my JD bucket was 49.5". So I welded on a small piece of angle iron to each end of the tooth bar and bolted it to the bucket. I didn't use the through bolts for the base, I used the supplied set screws. If you find the bar slips off the blade edge, add a few short weld "bumps" immediately forward of where the set screw contacts the blade and it won't slip. You'll then have a removable tooth bar! Great value, recommended.

This Bucket Tooth Bar is extremely well made and is of Great Quality!! It arrived in just two days, packed well and the price was really good!!! I will definitely buy from this wonderful company again!!!!

My tooth bar came preassembled with the teeth already attached to the plate. THANK YOU FOR THAT! It save me from having to punch the pins all in. My pucket was just under 50" inside width so this was a great fit for it. I have used my bucket a few times to push on trees so it is not a perfect straight edge even though I got it aligned pretty well. This assembly helped strengthen the bucket and I also used it with ropes and chains on the teeth to help lift some HVAC equipment for transport. I think I will keep the bar on for a while to test it out in the woods. It will no longer give you a perfect smooth front edge since the teeth stick down about 3/4" below the bucket surface. I did not drill holes and simply use the large set screws with some HF medium loctite and a impact gun. Lined it up and slowly worked each screw gradually ....pulled my bucket edge even straighter! It is securely attached now and pretty heavy duty...more so than the front of the bucket edge was. I also followed someones advice and topped the setscrews with clear silcone to keep the dirt out. For the price you will not find anything close to this thing and it will last a lifetime. I think shipping was free too which normally would be very expensive!!

Had to drill all seven holes in my Mahindra 1126 ,due to being universal fitment. Works great and should last a long time. I have put them through hell and still in great condition. Great price on solid steel bucket teeth. The teeth can be replaced one at a time if and when needed. Overall this is a great product at a great price compared to the manufacturer. Highly recommend product and Vevor.

Couldn't use it for the smaller sub-compact tractor, however my neighbor bought it from me for what I paid for it, and we installed it on his skid-steer. It works great. Very well built, good welds and easy to install. We have run it for everything from the manure pile. mulch pile, to loading logs and rocks into the bucket. Having teeth to bite into the work at hand makes a very big difference than just having a straight blade. 5 stars all around for the piece of equipment and 5 stars for the customer service agent, Yousef, who convinced me to hand onto it. Thanks to all.

Great product at the price point for yard projects and such

Works great! Very sturdy